✦ LIBER ✦

Morphology and Mechanical Properties of PA6/ABS Blends

✍ Scribed by Guo, Jian Bing; Zhang, Kai Zhou; Qin, Shu Hao

Book ID: 125840004
Publisher: Trans Tech Publications, Ltd.
Year: 2012
Tongue: English
Weight: 996 KB
Volume: 535-537
Category: Article
ISSN: 1662-8958
DOI: 10.4028/www.scientific.net/AMR.535-537.2600

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical and Rheological Properties of

Mechanical and Rheological Properties of PA6/ABS Blends - With and Without Short Glass Fiber

✍ Arsad, A.; Rahmat, A. R.; Hassan, A.; Iskandar, S. N. 📂 Article 📅 2010 🏛 SAGE Publications 🌐 English ⚖ 984 KB

Morphological, Thermal and Mechanical Pr

Morphological, Thermal and Mechanical Properties of Compatibilized Nylon 6/ABS Blends

✍ Ren, Junfang; Wang, Honggang; Jian, Lingqi; Zhang, Junyan; Yang, Shengrong 📂 Article 📅 2008 🏛 Taylor and Francis Group 🌐 English ⚖ 415 KB

Rheological, thermal, and morphological

Rheological, thermal, and morphological properties of ABS–PA1010 blends

✍ Ge Gao; Jingyuan Wang; Jinghua Yin; Xiaoqiang Yu; Rongtang Ma; Xinyi Tang; Zhihu 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 281 KB 👁 1 views

Noncompatibilized and compatibilized ABS-nylon1010 blends were prepared by melt mixing. Polystyrene and glycidyl methacrylate (SG) copolymer was used as a compatibilizer to enhance the interfacial adhesion and to control the morphology. This SG copolymer contains reactive glycidyl groups that are ab

Study of compatibility, morphology struc

Study of compatibility, morphology structure and mechanical properties of CPVC/ABS blends

✍ Li-Xin Zhang; Chao Zhou; Shu-Lin Sun; Liang Ren; Xiao-Lin Ma; Ming-Yao Zhang; Hu 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 357 KB 👁 2 views

Mechanical properties of ABS/polycarbona

Mechanical properties of ABS/polycarbonate blends

✍ H. Suarez; J. W. Barlow; D. R. Paul 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 377 KB 👁 2 views

The mechanical properties of extruder compounded blends of ABS and polycarbonate in the form of extruded-sheet and injection-molded bars are reported and compared with commercial products based on these components. The modulus and tensile yield strength exhibit a nearly additive response to blend co

Morphology and properties of PET/PA-6/E-

Morphology and properties of PET/PA-6/E-44 blends

✍ Yongqing Huang; Youxi Liu; Chunhua Zhao 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 549 KB

Polymer blends incorporating poly(ethylene terephthalate) (PET), polyamide-6 (PA-6), and a reactive compatibilizer (low molecular weight bisphenol-A epoxy resin-E-44) were prepared with the following E-44 weight percent concentrations: 0, 0.3, 0.6, 1, 3, 5, and 10. The samples was studied by a scann