๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Molecular plating, V. The influence of some experimental factors on the deposition yield

โœ Scribed by N. Getoff; H. Bildstein; E. Proksch

Publisher
Elsevier Science
Year
1967
Weight
233 KB
Volume
46
Category
Article
ISSN
0029-554X

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

The Influence of Molecular Orientation o
The Influence of Molecular Orientation on the Yield and Post-Yield Response of Injection-Molded Polycarbonate
โœ Tom A. P. Engels; Leon E. Govaert; Han E. H. Meijer ๐Ÿ“‚ Article ๐Ÿ“… 2009 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 870 KB

## Abstract The influence of the flow history experienced during injection molding on the mechanical properties of amorphous polymers is investigated. It is demonstrated that flowโ€induced molecular orientation only causes a small anisotropic effect on the yield stress, which can be regarded as insi

The influence of plate size with double
The influence of plate size with double cracks on stress intensity factor
โœ Guangwei, Meng ;Suhuan, Chen ;Hanbing, Liu ;Zhichao, Wang ๐Ÿ“‚ Article ๐Ÿ“… 1998 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 135 KB ๐Ÿ‘ 1 views

Using the quasi-compatible ยฎnite element method advanced by Zhichao and Lisu (1990), the inยฏuence of the size of a plate with double cracks on the stress intensity factor is studied. Many numerical computations are carried out and various data, curves and formulae are given. It is shown clearly how

The influence of different degrees of st
The influence of different degrees of stiffness of fixation plates on experimental bone healing
โœ Dr. Terje Terjesen; Kristen Apalset ๐Ÿ“‚ Article ๐Ÿ“… 1988 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 655 KB

In order to throw some light on the controversial issue of the optimal stiffness in fracture fixation, the effects on bone healing of rabbit tibial osteotomies fixed by plates with four different degrees of stiffness were studied. The least stiff plate was made of glass fiber-reinforced epoxy; the o

The influence of molecular weight of aci
The influence of molecular weight of acid dyes on the yield stress of dyed nylon monofilament
โœ Keiko Suganuma; Hiroshi Kuno ๐Ÿ“‚ Article ๐Ÿ“… 1984 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 490 KB ๐Ÿ‘ 2 views

The yield stress of nylon filament dyed with several acid dyes has been determined as a function of dye content and the molecular weight of acid dyes. The nylon filament dyed with acid dye has greater yield stress than undyed one. The relation between the increment of the yield stress ( f ) due to t