✦ LIBER ✦

Modification of poly(styrene) by reactive blending with nitrificated rubber

✍ Scribed by T. G. Vladkova

Publisher: John Wiley and Sons
Year: 2000
Tongue: English
Weight: 303 KB
Volume: 79
Category: Article
ISSN: 0021-8995
DOI: 10.1002/1097-4628(20010124)79:4<638::aid-app70>3.0.co;2-w

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Modification of poly(vinyl alcohol) poly

Modification of poly(vinyl alcohol) polymers by aliphatic carboxylic acids via reactive blending

✍ A. A. Haralabakopoulos; D. Tsiourvas; C. M. Paleos 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 126 KB 👁 1 views

The modification of poly(vinyl alcohol) with a series of long-chain aliphatic carboxylic acids via reactive blending was studied. The method involves the reaction in the melt of polymer hydroxyl groups with carboxylic acids using a laboratory scale reactor, a medium-scale Brabender rheomixer, and a

Reactive blending of nylon 6 and modifie

Reactive blending of nylon 6 and modified poly(styrene-co-maleic anhydride); influence of poly(styrene-co-maleic anhydride) modification by fatty amine onto blend properties

✍ I. Kelnar; M. Stephan; L. Jakisch; I. Fortelný 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 436 KB 👁 2 views

Blends of PA 6 with SMA or with 12.5-100% fatty amine (C 18) modified SMA at compositions 95/5-60/40 were studied. Particle size of SMA dispersed in PA 6 matrix was around 0.1 mm due to in situ compatibilizer formation. The strength and stiffness of the blends were higher and toughness unchanged in

Modification of chlorinated poly(vinyl c

Modification of chlorinated poly(vinyl chloride) by blending with epoxidized polybutadiene

✍ Dionissia D. Sotiropoulou; Kostas G. Gravalos; Nikos K. Kalfoglou 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 427 KB 👁 1 views

The compatibility of epoxidized poly (cis-1,4-butadiene) (EPB) with chlorinated polyvinylchloride ( CPVC ) was investigated. Blends studied covered the complete composition range using EPB at two degrees of epoxidation: 20 and 43 mol % oxirane units. Tensile properties of EPB(63)/CPVC were also stud

Chemical modification of poly(styrene-co

Chemical modification of poly(styrene-co-maleic anhydride) with primary N-alkylamines by reactive extrusion

✍ I. Vermeesch; G. Groeninckx 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 497 KB 👁 2 views

Compatibilization of polymer blends from

Compatibilization of polymer blends from poly(styrene-co-acrylonitrile) and polycarbonate by oxazoline modification of poly(styrene-co-acrylonitrile) in the melt

✍ Hinnerk Gordon Becker; Gudrun Schmidt-Naake 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 238 KB 👁 2 views

Thermoplastic elastomeric blend of nitri

Thermoplastic elastomeric blend of nitrile rubber and poly(styrene-co-acrylonitrile). II. Replacement of nitrile rubber by its vulcanizate powder

✍ S. Anandhan; P. P. De; Anil K. Bhowmick; S. K. De; S. Bandyopadhyay 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 217 KB 👁 1 views

## Abstract A model waste nitrile rubber powder (w‐NBR) was prepared by ambient grinding of aged NBR vulcanizate based on an oil seal formulation. The w‐NBR was characterized by scanning electron microscopic and optical microscopic techniques. Virgin nitrile rubber in a thermoplastic elastomeric 70