✦ LIBER ✦

Compatibilization of polymer blends from poly(styrene-co-acrylonitrile) and polycarbonate by oxazoline modification of poly(styrene-co-acrylonitrile) in the melt

✍ Scribed by Hinnerk Gordon Becker; Gudrun Schmidt-Naake

Publisher: John Wiley and Sons
Year: 2003
Tongue: English
Weight: 238 KB
Volume: 90
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.12825

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Chemical Modification of Poly(styrene-co

Chemical Modification of Poly(styrene-co-acrylonitrile) in a Melt

✍ H. Becker; N. Merayo; G. Schmidt-Naake 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 135 KB 👁 2 views

This paper was also published in German in Chem. Ing. Tech. 72 (2000) No. 3, pp. 234±239.

Melt rheology of poly(ϵ-caprolactone)/po

Melt rheology of poly(ϵ-caprolactone)/poly(styrene-co-acrylonitrile) blends

✍ Yuji Aoki; Oliver Arendt 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 167 KB

Miscibility of blends of bisphenol-A-pol

Miscibility of blends of bisphenol-A-polycarbonate and poly(styrene-co-acrylonitrile-co-hydroxystyrene) terpolymer

✍ Guangxian Li; Shiyun Mong; Sujun Jiang; L. Ragupathy; J. M. G. Cowie; R. Ferguso 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 160 KB 👁 1 views

Delamination failure mechanisms in micro

Delamination failure mechanisms in microlayers of polycarbonate and poly(styrene-co-acrylonitrile)

✍ T. Ebeling; A. Hiltner; E. Baer 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 441 KB 👁 2 views

The peel strength and delamination failure mode of coextruded microlayer sheets consisting of alternating layers of polycarbonate (PC) and poly(styrene-co-acrylonitrile) (SAN) were studied with the T-peel test. Four delamination modes were observed: two modes where the crack propagated along the PC-

Effects of the polybutadiene/poly(styren

Effects of the polybutadiene/poly(styrene-co-acrylonitrile) ratio in a polybutadiene-g-poly(styrene-co-acrylonitrile) impact modifier on the morphology and mechanical behavior of acrylonitrile–butadiene–styrene blends

✍ X. F. Xu; H. D. Yang; H. X. Zhang 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 173 KB

Rheological studies of the poly(styrene-

Rheological studies of the poly(styrene-co-acrylonitrile) and poly(vinyl chloride-co-vinyl acetate) blends

✍ Gaurab Das; A. N. Banerjee 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 243 KB 👁 2 views

The rheological studies of the poly(vinyl chloride-co-vinyl acetate) and poly-(styrene-co-acrylonitrile) blends were performed by a Brabender Rheotron at three different temperatures and also at different shear rates. Flow curves of the blends at different temperatures were drawn. The flow behavior