✦ LIBER ✦

Modelling of performance of zinc ferrites as high-temperature desulfurizing sorbents in a fixed-bed reactor

✍ Scribed by Miguel Pineda; JoséM. Palacios; Enrique García; Cristina Cilleruelo; JoséV. Ibarra

Book ID: 108322328
Publisher: Elsevier Science
Year: 1997
Tongue: English
Weight: 814 KB
Volume: 76
Category: Article
ISSN: 0016-2361
DOI: 10.1016/s0016-2361(97)00070-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Modeling high temperature desulfurizatio

Modeling high temperature desulfurization in a fixed-bed reactor

✍ Jimmy C.P. Wang; Frank R. Groves; Douglas P. Harrison 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 782 KB

time-dependent. isothermal, heterogeneous model has been used to describe the high temperature reaction of H,S with a metal oxide sorbent in a fixed-bed reactor. Plug flow of reacting gas is assumed, and individual pellets react according to the unreacted core model. Five bench-scale desulfurization

Performance of zinc oxide based sorbents

Performance of zinc oxide based sorbents for hot coal gas desulfurization in multicycle tests in a fixed-bed reactor

📂 Article 📅 2001 🏛 Elsevier Science ⚖ 164 KB

Method for producing formed clean coal before furnace use

The removal of hydrogen sulfide with man

The removal of hydrogen sulfide with manganic sorbent in a high-temperature fluidized-bed reactor

✍ Hyun Tae Jang; Sang Bum Kim; Dong Sup Doh 📂 Article 📅 2003 🏛 Springer US 🌐 English ⚖ 80 KB

The performance of a γ-Al2O3 catalyst fo

The performance of a γ-Al2O3 catalyst for the Claus reaction at low temperature in a fixed bed reactor

✍ M. Pineda; J.M. Palacios 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 645 KB

Reduction of CO2 under high pressure and

Reduction of CO2 under high pressure and high temperature on Pb-granule electrodes in a fixed-bed reactor in aqueous medium

✍ Fatih Köleli; Didem Balun 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 178 KB

98/02436 Hot gas desulfurization with zi

98/02436 Hot gas desulfurization with zinc titanate sorbents in a fluidized bed. 1. Determination of sorbent particle conversion rate model parameters : Konttinen, J. T. et al. Ind. Eng. Chemical Res., 1997, 36, (6), 2332–2339

📂 Article 📅 1998 🏛 Elsevier Science ⚖ 217 KB

the flue gas led from the lower side is contacted with the finely small drops for desulfurization and dust removal. The contact efficiency of the flue gas and the absorbent liquid is increased, resulting in efficient desulfurization.