𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Modelling and parameter comparison of equivalent circuits on the basis of impedance measurements of stainless steels

✍ Scribed by M. Slemnik

Publisher
John Wiley and Sons
Year
2006
Tongue
German
Weight
251 KB
Volume
57
Category
Article
ISSN
0947-5117

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

In our former work [1] we have discussed the impedance of differently heat treated steels X20Cr13 in 0.1 M H~2~SO~4~, undergoing an active passive transition. Impedance spectra were interpreted in terms of a model by Armstrong [2,Β 3], describing the electrochemical reaction at interfaces with adsorbed intermediates. The present work was performed in order to study this phenomenon in more detail, with computer simulations of a new created and more convenient equivalent circuit in comparison with the former model. Computer simulations of equivalent circuits were also made in the region of passivity which was also continuation of our earlier work [4]. In this sense the entire study for these steels was completed by collating distinctive parameter values, demonstrating electrochemical characteristics of steel X20Cr13, undergoing different heat treatments in the active‐passive and passive region.

πŸ“œ SIMILAR VOLUMES

RF equivalent-circuit model of interconn
RF equivalent-circuit model of interconnect bends based on S-parameter measurements
✍ Xiaomeng Shi; Jianguo Ma; Beng Hwee Ong; Kiat Seng Yeo; Manh Anh Do; Erping Li πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 289 KB

## Abstract A modified model for RF interconnect bends on lossy substrate in CMOS technology is presented. The model parameters are extracted directly from the on‐wafer S‐parameter measurements. The accuracy is verified up to 20 GHz by the measurements of the test structures. Β© 2005 Wiley Periodica

Measurements of electrochemical noise on
Measurements of electrochemical noise on the passive layer of differently heat treated stainless steels
✍ M. Slemnik; A. Petek; Prof. Dr. V. Doleček πŸ“‚ Article πŸ“… 1995 πŸ› John Wiley and Sons 🌐 German βš– 417 KB

## Abstract The passivation current fluctuations have been studied for differently heat treated steels X 20 Cr 13, after 20 h of passivation in 0.2 M H~2~SO~4~ at constant potentials + 0.20 V, + 0.40 V and + 0.60 V vs. SCE, respectively. Signals of the alternating passivation current have been moni

Effect of process parameters on the elec
Effect of process parameters on the electropolymerization potential and rate of formation of polypyrrole on stainless steel
✍ Jude O. Iroh; Wencheng Su πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 190 KB πŸ‘ 2 views

Polypyrrole coatings were formed on stainless steel working electrodes in aqueous oxalic acid solution. The rate of formation of polypyrrole coatings on stainless steel increased proportionately with the current density but increased slightly with increased pyrrole concentration. Increasing oxalic a