✦ LIBER ✦

Modeling the hot-deformation behavior of Ni60 wt%–Ti40 wt% intermetallic alloy

✍ Scribed by A.A. Khamei; K. Dehghani

Book ID: 116605702
Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 721 KB
Volume: 490
Category: Article
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2009.09.187

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructural analysis of thermally in

Microstructural analysis of thermally induced and deformation induced martensitic transformations in Fe–12.5 wt.% Mn–5.5 wt.% Si–9 wt.% Cr–3.5 wt.% Ni alloy

✍ T. Kirindi; M. Dikici 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 759 KB

Effect of α-precipitation on the superel

Effect of α-precipitation on the superelastic behavior of Ti–40 wt.%Nb–0.3 wt.%O alloy processed by equal channel angular extrusion

✍ R. Arockiakumar; J.K. Park 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 510 KB

A ultrafine-grain-structured Ti-40Nb-0.3O (wt.%) alloy has been fabricated via equal channel angular extrusion (ECAE) followed by annealing within an ␣ + ␤ two-phase field. The precipitation of ␣-phase was responsible for producing an annealed ultrafine-grain structure of about 1 m. As-ECAEed specim

Effect of ECAE-processing on the thermo-

Effect of ECAE-processing on the thermo-mechanical behavior of Ti34 wt.%Nb0.14 wt.%O shape memory alloy

✍ S.M. Kim; R. Arockiakumar; J.K. Park 📂 Article 📅 2012 🏛 Elsevier Science 🌐 English ⚖ 855 KB

Effect of 0.16 wt% hydrogen additio

Effect of 0.16 wt% hydrogen addition on high temperature deformation behavior of the Ti600 titanium alloy

✍ Yong Niu; Miaoquan Li 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 972 KB

Effect of adding 0.3 wt% Ni into th

Effect of adding 0.3 wt% Ni into the Sn–0.7 wt%Cu solder: Part I: Wetting behavior on Cu and Ni substrates

✍ M.J. Rizvi; C. Bailey; Y.C. Chan; H. Lu 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 771 KB

Effect of conventional and subzero treat

Effect of conventional and subzero treating on the mechanical properties of aged martensitic Fe–12 wt.% Ni–X wt.% Mn alloys

✍ S.Hossein Nedjad; M Nili-Ahmadabadi; R Mahmudi; H Farhangi 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 242 KB

Fe-Ni-Mn maraging alloys are suffering from sever embrittlement after aging. Mechanism of the embrittelement has not been well understood yet. Segregation of Mn atoms or formation of Austenite particles at prior Austenite grain boundaries (PAGBs) have been reported as embrittelement mechanisms while

Modeling the hot-deformation behavior of Ni60&#xa0;wt%–Ti40&#xa0;wt% intermetallic alloy

Modeling the hot-deformation behavior of Ni60 wt%–Ti40 wt% intermetallic alloy