✦ LIBER ✦

Modeling the Force, Surface Roughness and Cutting Temperature in Ultrasonic Vibration-Assisted Turning of Al7075

✍ Scribed by Nategh, M.J.; Amini, S.; Soleimanimehr, H.

Book ID: 125423309
Publisher: Trans Tech Publications, Ltd.
Year: 2009
Tongue: English
Weight: 205 KB
Volume: 83-86
Category: Article
ISSN: 1662-8958
DOI: 10.4028/www.scientific.net/amr.83-86.315

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

In-process prediction of surface roughne

In-process prediction of surface roughness in turning of Ti–6Al–4V alloy using cutting parameters and vibration signals

✍ Upadhyay, Vikas; Jain, P.K.; Mehta, N.K. 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 370 KB

Analysis of surface roughness and cuttin

Analysis of surface roughness and cutting force components in hard turning with CBN tool: Prediction model and cutting conditions optimization

✍ Hamdi Aouici; Mohamed Athmane Yallese; Kamel Chaoui; Tarek Mabrouki; Jean-Franço 📂 Article 📅 2012 🏛 Elsevier Science 🌐 English ⚖ 799 KB

Study of cutting force and surface rough

Study of cutting force and surface roughness in the turning of polytetrafluoroethylene composites with a polycrystalline diamond tool

✍ Catalin Fetecau; Felicia Stan 📂 Article 📅 2012 🏛 Elsevier Science 🌐 English ⚖ 902 KB

On the prediction of surface roughness i

On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations

✍ Hessainia, Zahia; Belbah, Ahmed; Yallese, Mohamed Athmane; Mabrouki, Tarek; Riga 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 604 KB

Investigation on the effects of ultrason

Investigation on the effects of ultrasonic vibration on material removal rate and surface roughness in wire electrical discharge turning

✍ A. Mohammadi; A. F. Tehrani; A. Abdullah 📂 Article 📅 2013 🏛 Springer 🌐 English ⚖ 883 KB

Study of the correlation between surface

Study of the correlation between surface roughness and cutting vibrations to develop an on-line roughness measuring technique in hard turning

✍ Dong Young Jang; Young-Gu Choi; Hong-Gil Kim; Alex Hsiao 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 733 KB

Surface roughness is one of the important factors in all areas of tribology and in evaluating the quality of a machining operation. In order to achieve computer controlled machining in a flexible manufacturing system, a technique is needed for the on-line, real-time monitoring of each machining proc