✦ LIBER ✦

In-process prediction of surface roughness in turning of Ti–6Al–4V alloy using cutting parameters and vibration signals

✍ Scribed by Upadhyay, Vikas; Jain, P.K.; Mehta, N.K.

Book ID: 119323572
Publisher: Elsevier Science
Year: 2013
Tongue: English
Weight: 370 KB
Volume: 46
Category: Article
ISSN: 0263-2241
DOI: 10.1016/j.measurement.2012.06.002

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Surface Roughness Optimization in Machin

Surface Roughness Optimization in Machining of Titanium Alloy (Ti-6Al-4V)

✍ Nithyanandam, J.; Laldas, Sushil; Palanikumar, K. 📂 Article 📅 2014 🏛 Trans Tech Publications, Ltd. 🌐 English ⚖ 297 KB

Optimization of Cutting Parameters for T

Optimization of Cutting Parameters for Turning Operation of Titanium Alloy Ti-6Al-4V Material Workpiece Using the Taguchi Method

✍ Shahebrahimi, Seyyed Pedram; Dadvand, Abdolrahman 📂 Article 📅 2013 🏛 Trans Tech Publications, Ltd. 🌐 English ⚖ 518 KB

Influence of surface roughness on consec

Influence of surface roughness on consecutively hydrogen absorption cycles in Ti–6Al–4V alloy

✍ Alejandra López-Suárez 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 920 KB

In the present work the influence of roughness of the material surface with hydrogen absorption in Tie6Ale4V alloy during four hydrogenated cycles is studied. The Tie6Ale4V alloy samples were hydrogenated during several cycles at 650 C for two hours, in 50% hydrogen and 50% argon atmospheres, 1 atm

On the prediction of surface roughness i

On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations

✍ Hessainia, Zahia; Belbah, Ahmed; Yallese, Mohamed Athmane; Mabrouki, Tarek; Riga 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 604 KB

Surface roughness and cutting force pred

Surface roughness and cutting force prediction in MQL and wet turning process of AISI 1045 using design of experiments

✍ Young Kug Hwang; Choon Man Lee 📂 Article 📅 2010 🏛 Springer-Verlag 🌐 English ⚖ 779 KB

Finite Element Prediction of Laser Shock

Finite Element Prediction of Laser Shock Peened Surface Modifications in Ti-6Al-4V Alloy

✍ Frija, Mounir; Fathallah, Raouf; Hassine, T. 📂 Article 📅 2009 🏛 Trans Tech Publications, Ltd. 🌐 English ⚖ 577 KB