๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Modeling laser-diode-pumped Tm3+-doped fiber amplifiers

โœ Scribed by Jun Chang; Qing-pu Wang; Xing-yu Zhang; Zhe-jin Liu; Zhao-jun Liu; Gang-ding Peng


Publisher
Tianjin University of Technology
Year
2005
Tongue
English
Weight
425 KB
Volume
1
Category
Article
ISSN
1673-1905

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


Diode-pumped room-temperature continuous
โœ B.Q. Yao; L.L. Zheng; X.M. Duan; Y.Z. Wang; G.J. Zhao; Q. Dong ๐Ÿ“‚ Article ๐Ÿ“… 2008 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 101 KB

We report on room-temperature laser actions of a novel thulium-doped crystal Tm:Lu2SiO5 (LSO) under diode pumping. An optical-optical conversion efficiency of 12% and a slope efficiency of 21% were obtained with the maximum continuous-wave (CW) output power of 0.67 W. The emission wavelengths of Tm:

Modeling Cladding-Pumped Er/Yb Fiber Amp
โœ George C. Valley ๐Ÿ“‚ Article ๐Ÿ“… 2001 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 236 KB

This paper presents a new computational strategy for efficient and stable modeling of rare-earth-doped fiber amplifiers and illustrates the strategy with results for a cladding-pumped erbiumrytterbium-doped fiber amplifier. The computational strategy allows arbitrary radial dependence for the optica

Gain-switching pulse generation of Tm-do
โœ H. Nakagami; S. Araki; H. Sakata ๐Ÿ“‚ Article ๐Ÿ“… 2011 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 137 KB

We present a Tm-doped fiber laser operating around 1.9 ฮผm by bi-directional pumping with 1.6 ฮผm-band laser diodes. The laser output pulse is built by using a gain-switching pump pulse with a bias pump pulse. The output pulse power is measured to 119 mW when the bias pump power and the gainswitching

Continuous-wave operation of a Ho:YAlO3
โœ B.Q. Yao; X.T. Yang; X.M. Duan; T.H. Wang; Y.L. Ju; Y.Z. Wang ๐Ÿ“‚ Article ๐Ÿ“… 2009 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 95 KB

We reported the Ho:YAP laser pumped by the Tmdoped fiber laser with a fiber Bragg grating. The Ho:YAP laser maximum output power was 3.94 W when the incident power was 10.6 W with the threshold of 2.54 W. The slope efficiency was 49%, corresponding to an optical-to-optical efficiency of 37.1%. The H