Yb-doped cladding-pumped fiber laser with linearly-polarized output emission was realized. To obtain linear-polarization operation we have applied Bragg grating written in the fiber with high birefringence as the input reflector. The polarization extinction ratio was of 17 dB. A maximum output power
Modeling Cladding-Pumped Er/Yb Fiber Amplifiers
✍ Scribed by George C. Valley
- Publisher
- Elsevier Science
- Year
- 2001
- Tongue
- English
- Weight
- 236 KB
- Volume
- 7
- Category
- Article
- ISSN
- 1068-5200
No coin nor oath required. For personal study only.
✦ Synopsis
This paper presents a new computational strategy for efficient and stable modeling of rare-earth-doped fiber amplifiers and illustrates the strategy with results for a cladding-pumped erbiumrytterbium-doped fiber amplifier. The computational strategy allows arbitrary radial dependence for the optical fields and rare-earth densities, arbitrary wavelength resolution for ampli-Ž . fied spontaneous emission ASE at pump and signal wavelengths, and arbitrary numbers of rate equations with arbitrary dependence on groundand excited-state number density. Numerical results are presented for cladding-pumped ErrYb-doped fiber amplifiers that illustrate how to reach the conversion efficiency limited by the quantum defect, how power conversion and the intensity of the ASE depend on operating wavelength, and how secondary loss mechanisms such as distributed loss, upconversion, and pairingrclustering affect the efficiency of the amplifier.
📜 SIMILAR VOLUMES
## Abstract A narrow line width, tunable, and highly efficient fiber laser based on Er^__3__+^/Yb^__3__+^ co‐doped double‐clad fiber with the maximum output power of 438 mW and a slope efficiency of ∼16% has been demonstrated. By using a fiber Bragg grating (FBG) as a narrow band reflector, 3‐dB li
## Abstract In this paper the generation of stable ns pulses by a laser diode pumped Yb‐doped double‐clad fiber laser is demonstrated. The fiber laser with two‐mirror cavity operates in a self‐Q‐switching regime, the Q‐switch mechanism of which is based on stimulated Brillouin scattering (SBS). Wit
## Abstract In this study, a continuously tunable Er‐doped fiber laser based on a double‐clad Er^3+^/Yb^3+^ co‐doped fiber amplifier is demonstrated. By using the nonlinear polarization rotation technique, the tunable laser operating can be an all‐fiber structure and have tuning range, power variat
## Abstract We propose and demonstrate a novel, all‐fiber and wavelength tunable Er^3+^/Yb^3+^ co‐doped cladding‐pumped fiber‐ring laser, which utilized amplified spontaneous emission (ASE) as a secondary source so that it can operate in L‐band. The lasing threshold can be reduced to 30% by reflect
A comprehensive observation of the stimulated Brillouin scattering (SBS) phenomena in a high power nanosecond linearly polarized Yb-doped double-clad fiber amplifier is presented. According to the behavior of SBS, the amplification process is divided into four regions. All the temporal, spectral and