## Abstract Simple methods for calculating well losses are important for well design and optimization of groundwater source operation. Well losses arise from both laminar flow within the aquifer and turbulent flow within the well, and are often ignored in theoretical aquifer test analysis. The Jaco
Modeling and predictive control using fuzzy logic: Application for a polymerization system
✍ Scribed by Nádson M. N. Lima; Lamia Zuñiga Liñan; Rubens Maciel Filho; Maria R. Wolf Maciel; Marcelo Embiruçu; Filipe Grácio
- Publisher
- American Institute of Chemical Engineers
- Year
- 2009
- Tongue
- English
- Weight
- 910 KB
- Volume
- 56
- Category
- Article
- ISSN
- 0001-1541
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract The PV array has a unique operating point that can supply maximum power to the load. This point is called the maximum‐power point (MPP), and is located on the output characteristics of the array. The locus of this point varies, non‐linearly, with the unpredictable variations in the sola
An automation system's operating performance is judged by how well an automation unit is monitored and maintained by its supervisors. Previous research has shown that situation awareness (SA) and trust are critical factors in automation. The purpose of this study was to evaluate and improve supervis
## Abstract Pakistan is endowed with one of the largest contiguous irrigation systems in the world. Considerable food production per unit area and per unit of water is inevitable to meet present‐day needs. The optimal use and effective management of water resources may lead to a significant increas