The proposed PV system consists of four subsystems; the PV array subsystem, the power conditioning subsystem, the control subsystem, and the DC load subsystem. Experimental realization of the proposed system is carried out. The control of the switching duty cycle of the used DC}DC converter is achie
Maximum-power operation of a stand-alone PV system using fuzzy logic control
✍ Scribed by Abd El-Shafy A. Nafeh; F. H. Fahmy; E. M. Abou El-Zahab
- Publisher
- John Wiley and Sons
- Year
- 2002
- Tongue
- English
- Weight
- 268 KB
- Volume
- 15
- Category
- Article
- ISSN
- 0894-3370
- DOI
- 10.1002/jnm.460
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The PV array has a unique operating point that can supply maximum power to the load. This point is called the maximum‐power point (MPP), and is located on the output characteristics of the array. The locus of this point varies, non‐linearly, with the unpredictable variations in the solar insolation and/or the cell temperature. Thus, to operate the PV array at its MPPs for every instant, the PV system must contain a maximum‐power point tracking (MPPT) controller. This article proposes the application of the fuzzy logic controller (FLC) to operate a suggested PV control system at the MPP of the array for every instant. The simulation of the system indicates that the use of the FLC gives good results for the MPPT. Copyright © 2002 John Wiley & Sons, Ltd.
📜 SIMILAR VOLUMES
## Abstract Pakistan is endowed with one of the largest contiguous irrigation systems in the world. Considerable food production per unit area and per unit of water is inevitable to meet present‐day needs. The optimal use and effective management of water resources may lead to a significant increas