𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Microstructure features affecting mechanical properties and corrosion behavior of a hypoeutectic Al–Ni alloy

✍ Scribed by Wislei R. Osório; Leandro C. Peixoto; Manuel V. Canté; Amauri Garcia

Publisher
Elsevier Science
Year
2010
Weight
923 KB
Volume
31
Category
Article
ISSN
0261-3069

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructure and mechanical properties
Microstructure and mechanical properties of spray deposited hypoeutectic Al–Si alloy
✍ C.F. Ferrarini; C. Bolfarini; C.S. Kiminami; W.J. Botta F 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 207 KB

The microstructure and the tensile properties of an Al-8.9 wt.% Si-3.2 wt.% Cu-0.9 wt.% Fe-0.8% Zn alloy processed by spray forming was investigated. The alloy was gas atomized with argon and deposited onto a copper substrate. The microstructure was evaluated by optical microscopy (OM), scanning ele

Microstructure and mechanical properties
Microstructure and mechanical properties of spray deposited and extruded/heat treated hypoeutectic Al–Si alloy
✍ L.A. Bereta; C.F. Ferrarini; C.S. Kiminami; W.J.F. Botta; C. Bolfarini 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 458 KB

The microstructure and the tensile properties of an Al-8.9 wt.% Si-3.2 wt.% Cu-0.9 wt.% Fe-0.8% Zn alloy processed by spray forming was investigated. The porosity level, the conditions of the heat treatment applied and the presence/addition of certain alloying elements to this alloy is known to grea

Improvement of the Mechanical Properties
Improvement of the Mechanical Properties and Corrosion Behavior of Cu-Al 6.0 alloy by Si and Mn addition
✍ Dr. Z. Ahmad 📂 Article 📅 1979 🏛 John Wiley and Sons 🌐 German ⚖ 660 KB

## Abstract The corrosion resistance of aluminium bronze may be considerably improved by additions of Si and Mn; 2% Si and 0.2% Mn yielded considerably increase of the corrosion resistance to hydrochlorid, sulfuric and phosphoric acids, sodium hydroxide and seawater. Addition of silicon alone impro