𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Improvement of the Mechanical Properties and Corrosion Behavior of Cu-Al 6.0 alloy by Si and Mn addition

✍ Scribed by Dr. Z. Ahmad


Publisher
John Wiley and Sons
Year
1979
Tongue
German
Weight
660 KB
Volume
30
Category
Article
ISSN
0947-5117

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

The corrosion resistance of aluminium bronze may be considerably improved by additions of Si and Mn; 2% Si and 0.2% Mn yielded considerably increase of the corrosion resistance to hydrochlorid, sulfuric and phosphoric acids, sodium hydroxide and seawater. Addition of silicon alone improves the resistance to sodium chloride, too, not, however, the resistance to hydrochlorid acid. Addition of Mn has a synergistic effect; the amount of 0.2% used here has practically no influence on ultimate tensile strength, but ductility is decreased by both Si and Mn.


πŸ“œ SIMILAR VOLUMES


Effects of Sn and Ca additions on micros
✍ C. Jihua; C. Zhenhua; Y. Hongge; Z. Fuquan; C. Yingliang πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 German βš– 972 KB

## Abstract Effects of Sn and Ca additions on microstructure, mechanical properties, and corrosion resistance of the as‐cast Mg‐6Zn‐2Al‐based alloy were investigated by SEM, XRD, tensile tests, electrochemical measurements, etc. The higher the Sn content, the higher the yield strength of the Mg‐6Zn

The effect of Nb addition on mechanical
✍ C. L. Qiu; L. Liu; M. Sun; S. M. Zhang πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 415 KB πŸ‘ 1 views

## Abstract Bulk metallic glasses (BMGs) of Zr~65 βˆ’ __x__~Nb~__x__~‐ Cu~17.5~Ni~10~Al~7.5~ with Nb = 0, 2, and 5 at % were prepared by copper mold casting. Compression tests reveal that the two BMGs containing Nb exhibited superior strength and plasticity to the base alloy. The corrosion behavior o