𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Microstructural and micromechanical characterisation of TiAl alloys using atomic force microscopy and nanoindentation

✍ Scribed by S. Gebhard; F. Pyczak; M. Göken


Publisher
Elsevier Science
Year
2009
Tongue
English
Weight
951 KB
Volume
523
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

✦ Synopsis


Different microstructures were generated in the Ti-45Al-4.6Nb-0.2B-0.2C and Ti-45Al-1Cr alloys (at.%) by heat treatment. The microstructures were investigated using nanoindentation and atomic force microscopy which was compared with transmission electron microscopy. Topographic contrast is usually used for phase identification in the atomic force microscope. However, it was found that the topographic order of the phases changes with different microstructures and specimen preparations. Nanoindentation measurements provided local hardness values not obtainable by other methods and enabled clear distinction of the phases. The hardness values can give information on surrounding microstructure and solid solution hardening. The mean lamellar spacing of the colonies was measured using both atomic force microscopy and transmission electron microscopy. Atomic force microscopy was found to be suitable to determine the spacing between ␣ 2 /␥-interfaces offering the advantages of easier sample preparation and fewer specimens compared to evaluation by TEM analysis.


📜 SIMILAR VOLUMES


Micromechanical bending of single collag
✍ Lanti Yang; Kees O. van der Werf; Bart F.J.M. Koopman; Vinod Subramaniam; Martin 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 371 KB

## Abstract A new micromechanical technique was developed to study the mechanical properties of single collagen fibrils. Single collagen fibrils, the basic components of the collagen fiber, have a characteristic highly organized structure. Fibrils were isolated from collagenous materials and their

Investigation of protein partnerships us
✍ Ellis, Darren J.; Berge, Torunn; Edwardson, J. Michael; Henderson, Robert M. 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 530 KB

The origin of contrast in atomic force microscopy (AFM) lies in the probe's response to forces between itself and the sample. These forces most commonly result from changes in height as the tip is scanned over the surface, but can also originate in properties inherent in the sample. These have been

Force Microscopy || Resolving the Thickn
✍ Jena, Bhanu P.; Hrber, J. K. Heinrich 📂 Article 📅 2006 🏛 John Wiley & Sons, Inc. 🌐 English ⚖ 461 KB

A complete examination of the uses of the atomic force microscope in biology and medicine This cutting-edge text, written by a team of leading experts, is the first detailed examination of the latest, most powerful scanning probe microscope, the atomic force microscope (AFM). Using the AFM, in comb