๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Microstructural analysis and tensile properties of thick copper and nickel sputter deposits

โœ Scribed by S.D. Dahlgren; W.L. Nicholson; M.D. Merz; Walter Bollmann; J.F. Devlin; R. Wang

Publisher
Elsevier Science
Year
1977
Tongue
English
Weight
960 KB
Volume
40
Category
Article
ISSN
0040-6090

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Thickness dependence of the structural a
Thickness dependence of the structural and electrical properties of copper films deposited by dc magnetron sputtering technique
โœ Kah-Yoong Chan; Teck-Yong Tou; Bee-San Teo ๐Ÿ“‚ Article ๐Ÿ“… 2006 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 208 KB

This paper addresses the influences of film thickness on structural and electrical properties of dc magnetron sputter-deposited copper (Cu) films on p-type silicon. Cu films with thicknesses of 130-1050 nm were deposited from Cu target at sputtering power of 125 W in argon ambient gas pressure of 3.

Thickness-dependent structural and optic
Thickness-dependent structural and optical properties of sputter deposited ZrO2 films
โœ Sha Zhao; Fei Ma; Zhongxiao Song; Kewei Xu ๐Ÿ“‚ Article ๐Ÿ“… 2008 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 255 KB

ZrO 2 thin films in thickness of 17 nm to 559 nm were deposited on Si-(1 0 0) and glass substrates using mid-frequency reactive magnetron sputtering method. The microstructure analysis showed that the stable monoclinic phase preferentially grew in the initial growth stage, whereas the relative amoun

Microstructure and magnetic properties o
Microstructure and magnetic properties of aerosol-deposited Sm-Fe-N thick films
โœ Tomohito Maki; Satoshi Sugimoto; Toshio Kagotani; Koichiro Inomata; Jun Akedo ๐Ÿ“‚ Article ๐Ÿ“… 2006 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 834 KB

## Abstract In this study, the relationship among magnetic properties, Aerosol Deposition (AD) conditions, and microstructures in Smโ€Feโ€N AD films was investigated. The maximum thickness of 145ยตm was obtained under AD conditions of gas flow rate (__gfr__)=6liters/min for 10 min. The density of Smโ€F