## Abstract Design of a compact microstrip band reject filter is proposed. The device consists of an Open Loop Rectangular Resonator (OLRR) coupled to a microstrip line. The transmission line has a U‐bend which enhances the coupling with the OLRR element and reduces the size of the filter. The filt
Microstrip low-pass filter using open loop resonators
✍ Scribed by Kumud Ranjan Jha; Neeraj Nehra
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 515 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A compact open loop resonator microstrip low pass filter is modeled. To optimize the performances of the filter, electromagnetic simulation is used to tune the dimensions of proposed prototype. Cascading of open loop resonator provides a very sharp cut off and wide stop band with minimum insertion loss. The filter is simulated with an equivalent circuit model and it is found to be in good agreement with the structure model response. The structure provides a near ideal response. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2983–2986, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23817
📜 SIMILAR VOLUMES
## Abstract An ultra‐narrow band band‐pass filter with Square open loop resonator (SOLR) is reported in this article. The designed OLR cell demonstrates compact size, broad band‐stop and good slow‐wave effect. An ultra‐narrow band band‐pass filter, incorporated with three SOLR cells, is simulated a
## Abstract In this letter, a highly selective microstrip bandpass filter using triangular open‐loop resonators with improved cross‐coupled structure is designed, fabricated, and measured. The new cross coupling structure is implemented by inserting two L‐shaped stubs into the triangular open‐loop
## Abstract In this paper, a design technique that includes a synthesis procedure and a realization method for a microstrip open‐loop resonator filter with two passbands is described. Transmission zeros of the filter‐transfer function are employed to split a single passband into two passbands, and
## Abstract In this article, several square open‐loop resonators with transmission lines are proposed to design the optimized bandpass filters. A compact microstrip filter using an open‐loop resonator was designed, fabricated and measured. At the center frequency f~0~ = 1.80 GHz, a 3‐dB bandwidth o
## Abstract In this paper, a bandpass filter using a microstrip slow‐wave open‐loop resonator with high impedance lines is presented. This resonator has the high impedance of a loaded microstrip line, which significantly increases not only the slow‐wave effect but also the dispersion effect. These