✦ LIBER ✦

Microstrip antennas with loaded trapezoidal slots for broadband tactical wireless communications

✍ Scribed by Qinjiang Rao; Tayeb A. Denidni

Publisher: John Wiley and Sons
Year: 2007
Tongue: English
Weight: 230 KB
Volume: 49
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.22400

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

In this letter, a broadband microstrip antenna suitable for tactical wireless communication at 1.35–1.75 GHz was proposed by loading trapezoidal slots. Compared with rectangular slotted patch antennas, the proposed design achieved a smaller size and a larger bandwidth. In addition, due to more design parameters, better antenna performances can be obtained by optimizing these parameters. Simulated and measured results validate the proposed design. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 1210–1212, 2007; Published online in Wiley InterScience (www.interscience.wiley.com) DOI 10.1002/mop.22400

📜 SIMILAR VOLUMES

A broadband slot-loaded trapezoid micros

A broadband slot-loaded trapezoid microstrip antenna

✍ Mon-Chun Pan; Kin-Lu Wong 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 135 KB 👁 2 views

of Targets Correctly Classified with Respect to the Number of Tests Considered for Different Signal-to-Noise Ratios Signal-to-Noise Ratio Targets Correctly Classified SrN s 50 dB 30r30 SrN s 40 dB 30r30 SrN s 30 dB 28r30 SrN s 20 dB 27r30 than 90%, while for a signal-to-noise ratio greater than 40

Novel dual-broadband design of semicircu

Novel dual-broadband design of semicircular slot antenna for wireless communication

✍ Hai-Ming Hsiao; Jui-Han Lu; Jeun-Wen Wu 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 461 KB

## Abstract A novel design of semicircular slot antenna with dual‐broadband operation for 2.4/5 GHz wireless local network area (WLAN) is proposed. With the use of an arc‐shaped strip inset along the circle edge of the semicircular slot antenna, a new resonant mode close to the second operating mod

Planar slot antenna with PBG filter for

Planar slot antenna with PBG filter for wireless communications

✍ Fabrizio Consoli; Rocco Catalano; Roberto Laudani; Livia Tumino; Sebastiano Barb 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 370 KB

## Abstract A planar circular slot antenna, integrated with a band‐stop photonic bandgap filter is presented here. The complete realized prototype is suitable to cover the bandwidth requirements of many wireless communication standards in one solution. The work describes the detailed study of both

Broadband equilateral-triangular microst

Broadband equilateral-triangular microstrip antenna with asymmetric bent slots and integrated reactive loading

✍ Shyh-Tirng Fang; Tzung-Wern Chiou; Kin-Lu Wong 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 125 KB 👁 2 views

A wide operating bandwidth for a single-layer equilateraltriangular microstrip antenna can be obtained by embedding a pair of asymmetric bent slots inside the patch and inserting an inset microstripline section at the patch edge as an integrated reacti¨e load. With the proposed design, a group of th

Novel dual-broadband rectangular-slot an

Novel dual-broadband rectangular-slot antenna for 2.4/5-GHz wireless communication

✍ Hai-Ming Hsiao; Jeun-Wen Wu; Yau-Der Wang; Jui-Han Lu; Shun-Hsyung Chang 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 451 KB

## Abstract A novel design of rectangular slot‐antenna with dual‐broadband operation for 2.4/5‐GHz wireless local area networks (WLANs) is proposed. With the use of two rectangular strips inset along the center line of the rectangular‐slot antenna, a new resonant mode close to the second operating

Slot-coupled compact broadband circular

Slot-coupled compact broadband circular microstrip antenna with chip-resistor and chip-capacitor loadings

✍ Jui-Han Lu; Chia-Luan Tang; Kin-Lu Wong 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 221 KB 👁 2 views

The characteristics of a slot-coupled circular microstrip antenna with chip-resistor and chip-capacitor loadings are studied. With a chip-resistor loading, a significant decrease in the resonant frequency of the microstrip antenna is achie¨ed, which can result in a large antenna size reduction, and