𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Broadband equilateral-triangular microstrip antenna with asymmetric bent slots and integrated reactive loading

✍ Scribed by Shyh-Tirng Fang; Tzung-Wern Chiou; Kin-Lu Wong


Publisher
John Wiley and Sons
Year
1999
Tongue
English
Weight
125 KB
Volume
23
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


A wide operating bandwidth for a single-layer equilateraltriangular microstrip antenna can be obtained by embedding a pair of asymmetric bent slots inside the patch and inserting an inset microstripline section at the patch edge as an integrated reacti¨e load. With the proposed design, a group of three closely excited resonant modes of similar broadside radiation characteristics near the fundamental resonant mode of a corresponding simple equilateral-triangular microstrip antenna can be achie¨ed. Results show that an operating bandwidth as large as 4.5 times that of a simple triangular microstrip antenna can be achie¨ed. Details of the antenna design and experimental results are presented.


πŸ“œ SIMILAR VOLUMES


Microstrip-line-fed broadband circular m
✍ Jen-Yea Jan; Kin-Lu Wong πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 112 KB πŸ‘ 2 views

A design of broadband circular microstrip antenna with embedded reactiΒ¨e loading directly matched to a 50 ⍀ microstrip feed line is presented. This design is achieΒ¨ed owing to the integrated reactiΒ¨e loading, a T-shaped microstrip-line section embedded in a nearly rectangular slot cut near the patch

Slot-coupled compact broadband circular
✍ Jui-Han Lu; Chia-Luan Tang; Kin-Lu Wong πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 221 KB πŸ‘ 2 views

The characteristics of a slot-coupled circular microstrip antenna with chip-resistor and chip-capacitor loadings are studied. With a chip-resistor loading, a significant decrease in the resonant frequency of the microstrip antenna is achie¨ed, which can result in a large antenna size reduction, and

Dual-frequency rectangular microstrip an
✍ Jui-Han Luand; Kin-Lu Wong πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 151 KB πŸ‘ 2 views

are used to check the accuracy of the measurement technique. A good agreement between the measured dielectric constant and the reported one is observed. The results show that the dielectric constant of the material can be measured using the waveguide cavities with a good accuracy. REFERENCES 1. L.P.