Micro-wear properties of carbon nitride coatings

✍ Scribed by Koji Kato; Hiroyuki Koide; Noritsugu Umehara

• Publisher: Elsevier Science
• Year: 2000
• Tongue: English
• Weight: 496 KB
• Volume: 238
• Category: Article
• ISSN: 0043-1648
• DOI: 10.1016/s0043-1648(99)00338-5

✦ Synopsis

Ž

. Micro-wear tests of amorphous carbon nitride CN coating against a diamond pin were carried out by using a atomic force x microscopy. Micro-wear properties of CN were shown as functions of coating condition, contact load, pin radius and contact pressure.

x

The coating condition provides about 10 times difference of specific wear amount of CN coating. The depth of wear of CN coating

increased drastically by increasing the contact load to above a critical value. CN was influenced pin radius. The depth of wear scar of

x CN coating changed depending on the pin radius under the same contact load. Combined with the effects of contact load and pin radius,

x the effect of contact pressure on specific wear amount was made clear. The specific wear amount of CN coating increased with

x maximum contact pressure. On the other hand, specific wear amount of DLC was shown to be independent of maximum contact pressure. At the maximum contact pressure lower than about 10 GPa, the specific wear amount of CN coating was smaller than that of DLC.

x Contact pressure dependence of wear of CN coating was introduced by nano-scale delamination of the coating.