𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Method of influencing the rigidity of a vehicle door window seal


Publisher
Elsevier Science
Year
2004
Tongue
English
Weight
169 KB
Volume
2004
Category
Article
ISSN
1350-4789

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Method for production of vehicle window
πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 227 KB

## Fuqing Xiaguang Lighting Co Ltd, China A new seal wire for glass is described in this patent. It has an outer iron layer instead of copper on the traditional dumet core wire. The weight ratio between iron and alloy in the whole glass seal wire is controlled, so that the expansion coefficient of

Method and system for applying a seal to
πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 90 KB

An oil seal is described that has a pair of concentric seal lips contained in a rotating housing and a stationary flange between them. The inner lip does not contact the stationary flange when the shaft is stationary but moves to close the gap, presumably due to centrifugal force. A wide selection o

Optimization of a door seal structure of
✍ Ana Maria Rocha; Margarida FacΓ£o; JoΓ£o Pedro Sousa; AntΓ³nio Viegas πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 247 KB

## Abstract The optimum door seal configuration to prevent radiation leakage from a microwave oven is still a manufacturing concern. Here, we propose a numerical algorithm to simulate the radiation propagation along a door seal structure using the finite‐difference time domain method, which is used

Aerodynamic influence of a passing vehic
✍ Satoru Yamamoto; Kazuo Yanagimoto; Hitoshi Fukuda; Hiroshi China; Kunio Nakagawa πŸ“‚ Article πŸ“… 1997 πŸ› Elsevier Science 🌐 English βš– 604 KB

The aerodynamic influence of a passing vehicle on the motion stability of other vehicles is discussed. According to the results of wind tunnel tests and actual car tests, it is found that the interference phenomenon can be treated as a quasi-steady problem when relative speed is small. The influence

Analysis of door seal structure of micro
✍ Yuusuke Kusama; Osamu Hashimoto; Minoru Makida πŸ“‚ Article πŸ“… 2002 πŸ› John Wiley and Sons 🌐 English βš– 333 KB

## Abstract This paper focuses on the choke structure, which is generally used in suppressing the leakage wave from the door gap of microwave ovens. A choke structure which simulates the interdigital periodic choke structure for mass‐produced microwave ovens is considered, and the shielding effect