𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Melt functionalization of polypropylene with methyl esters of itaconic acid

✍ Scribed by M Yazdani-Pedram; H Vega; R Quijada

Book ID
108366298
Publisher
Elsevier Science
Year
2001
Tongue
English
Weight
154 KB
Volume
42
Category
Article
ISSN
0032-3861

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Functionalization of polypropylene by gr
Functionalization of polypropylene by grafting with itaconic acid
✍ Mehrdad Yazdani-Pedram; HΓ©ctor Vega; RaΓΊl Quijada πŸ“‚ Article πŸ“… 1996 πŸ› John Wiley and Sons 🌐 English βš– 313 KB

## Abstract Grafting of polypropylene was carried out in both boiling xylene and decalin as solvent medium with itaconic acid (2‐methylenesuccinic acid) as functional polar monomer using 2,5‐dimethyl‐2,5‐bis(__tert__‐butylperoxy)hexane (Lupersol 101) as radical initiator. It was found that the temp

Nondegradative melt functionalization of
Nondegradative melt functionalization of polypropylene with glycidyl methacrylate
✍ H. Huang; N. C. Liu πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 169 KB πŸ‘ 1 views

The melt grafting of glycidyl methacrylate (GMA) onto powdered isotactic polypropylene (PP) in a Haake Rheocord RC90 mixer was studied. Grafting degrees were determined by nonaqueous back titration of trichloroacetic acid with sodium hydroxide. The extent of degradation and crosslinking of PP during

Diffusion of methyl esters of higher fat
Diffusion of methyl esters of higher fatty acid in polypropylene
✍ Hiromichi Hayashi; Hiroshi Sakai; Shuji Matsuzawa πŸ“‚ Article πŸ“… 1994 πŸ› John Wiley and Sons 🌐 English βš– 621 KB

Diffusion coefficients of several methyl esters of linear higher fatty acid ( Clo -CIS) into polypropylene (PP) were determined, over the temperature range of 50 to llO"C, using a mass uptake technique. The relations between a n amount of mass uptake and tl'\* were linear within 10 min, indicating F

Functionalization of isotactic polypropy
Functionalization of isotactic polypropylene with acrylic acid in the melt: Synthesis, characterization and evaluation of thermomechanical properties
✍ G.S.Srinivasa Rao; M.S. Choudhary; M.K. Naqvi; K.V. Rao πŸ“‚ Article πŸ“… 1996 πŸ› Elsevier Science 🌐 English βš– 565 KB

## Functionalization of isotactic polypropylene (iPP) with acrylic acid (AA) was studied in the melt mixing head of a brabender plasticorder (BPCR) and a twin screw extruder (TSE) using peroxide initiators. The effect of monomer and initiator concentrations on percent grafting, grafting efficienc