## Abstract Multiโwalled carbon nanotube (MWCNT)/Poly(ethylene terephthalate) (PET) nanowebs were obtained by electrospinning. For uniform dispersion of MWCNTs in PET solution, MWCNTs were functionalized by acid treatment. Introduction of carboxyl groups onto the surface of MWCNTs was examined by F
Melt-crystallization mechanism of poly(ethylene terephthalate)/multi-walled carbon nanotubes prepared by in situ polymerization
โ Scribed by G. Antoniadis; K. M. Paraskevopoulos; D. Bikiaris; K. Chrissafis
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 728 KB
- Volume
- 47
- Category
- Article
- ISSN
- 0887-6266
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
## Abstract Treating MWCNTs with an acidic solution (concentrated H~2~SO~4~/HNO~3~; 3:1) and subsequently with succinic acid peroxide leads to MWCNTs functionalized with carboxyl groups on their sidewalls (or surfaces). These MWCNTโCOOH were converted to MWCNTโCOCl and further to MWCNTโNH~2~. The P
## Abstract Thermomechanical properties and crystallization behavior of poly(ethylene terephthalate) (PET) nanocomposites containing layered double hydroxide (LDH) were investigated. To enhance the compatibility between PET matrix and LDH, dimethyl 5โsulfoisophthalate (DMSI) anion intercalated LDH
## Abstract Multiโwalled carbon nanotubes (MWNT) purified by acidic solution were processed with PMMA via an inโsitu polymerization. Experimental evidences indicate the role of radical initiator (AIBN) and MWNT, showing increases of polymerization rate and MWNT diameter. Induced radicals on the MWN