Mechanism of liquid—solid mass transfer and shear stress in three-phase fluidized beds
✍ Scribed by Iordan Nikov; Henri Delmas
- Publisher
- Elsevier Science
- Year
- 1992
- Tongue
- English
- Weight
- 892 KB
- Volume
- 47
- Category
- Article
- ISSN
- 0009-2509
No coin nor oath required. For personal study only.
✦ Synopsis
Local solid-liquid mass transfer and shear stress in gas-liquid-solid fluidized beds are studied experimentally to clarify the influence of gas flow. The electrochemical method of local mass transfer coefficient measurements was used. The effect of gas velocity on mass transfer is essentially due to a change in the velocity gradient close to the particle surface. In this case, each sphere is surrounded by a gas-liquid mixture, which has a lower homogeneous density, thus increasing the particle terminal velocity, which in turn affects positively the mass transfer coefficients. The turbulence affects the mass transfer in two different conflicting ways. At mean relative velocity, turbulence increases mass transfer, especially at high Re. In the subcritical domain, turbulence increases the drag coefficient and therefore decreases the particle terminal velocity. This latter effect could have a negative influence on mass transfer.
📜 SIMILAR VOLUMES
Liquid holdups and wall-to-bed heat transfer coefficients in threephase fluidized beds with glass beads and cylindrical y-alumina particles were determined ex- perimentally. It was found that the product of heat transfer coefficient and liquid holdup in threephase fludized beds is equal to that in c
The volumetric gas-liquid mass transfer coefficient (KLa) and axial dispersion coefficient (Dz) of liquid phase have been studied in air-oxygen saturated water fluidized beds of 0.52 to 0.755 mm glass spheres in a plexiglass column. The effects of liquid velocity, gas velocity, particle size and loa