𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Mechanical properties of polymer impregnated cement systems and the effect of moisture on their dimensional stability

✍ Scribed by R.F. Feldman; J.J. Beaudoin

Publisher
Elsevier Science
Year
1984
Tongue
English
Weight
383 KB
Volume
14
Category
Article
ISSN
0008-8846

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of vacuum mixing on the mechanica
Effect of vacuum mixing on the mechanical properties of antibiotic-impregnated polymethylmethacrylate bone cement2
✍ Askew, Michael J. ;Kufel, Mark F. ;Fleissner, Paul R. ;Gradisar, Ivan A. ;Salstr πŸ“‚ Article πŸ“… 1990 πŸ› John Wiley and Sons 🌐 English βš– 495 KB πŸ‘ 1 views

## Abstract Polymethylmethacrylate bone cement, containing either no added antibiotic, 0.5 g of Vancomycin, 1.0 g of Vancomycin, or 1.0 g of Tobramycin, was mixed either in air or a vacuum chamber. Following storage in a water bath at 37Β°C for 48 h, the specimens were tested in four‐point bending.

Effect of acetylation on dimensional sta
Effect of acetylation on dimensional stability, mechanical, and dynamic properties of jute board
✍ A. K. Rana; B. C. Mitra; A. N. Bannerjee πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 261 KB πŸ‘ 2 views

Jute slivers were acetylated in pilot scale following a no catalyst-no solvent method at 120Β°C for 2 h. The weight % gain was found to be 11.37. Different jute boards were pressed under heat and pressure using acetylated jute sliver and urea formaldehyde resin. Neutral salt (NaCl), acid salt (NH 4 C