๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Mechanical properties of particulate filled polymers

โœ Scribed by D. M. Bigg

Publisher
Society for Plastic Engineers
Year
1987
Tongue
English
Weight
789 KB
Volume
8
Category
Article
ISSN
0272-8397

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Some mechanical properties of particulat
Some mechanical properties of particulate-filled thermosetting and thermoplastic polymers
โœ M. Narkis ๐Ÿ“‚ Article ๐Ÿ“… 1976 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 508 KB

Hai f a, Isra e 1 ## Synopsis A semiempirical, single-parameter equation describes the modulus of particulate systems This equation has been found applicable for thermoplastic/glass bead systems, and it is further verified for particulate thermosetting systems (epoxy and polyester matrices). The

Particulate-filled glassy polymers
Particulate-filled glassy polymers
โœ M. Narkis; E. Joseph ๐Ÿ“‚ Article ๐Ÿ“… 1978 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 518 KB
Fracture of particulate filled polymers
Fracture of particulate filled polymers
โœ Kendall, Kevin ๐Ÿ“‚ Article ๐Ÿ“… 1978 ๐Ÿ› Wiley (John Wiley & Sons) ๐ŸŒ English โš– 320 KB

## Abstract The addition of particulate mineral fillers to polymers confers certain mechanical property improvements automatically. Stiffness increases, creep diminishes and distortion at elevated temperatures is often reduced. However, the fracture energy of a polymer, as measured in impact, crack

Hybrid particulate-filled epoxy-polymers
Hybrid particulate-filled epoxy-polymers
โœ D. Maxwell; R. J. Young; A. J. Kinloch ๐Ÿ“‚ Article ๐Ÿ“… 1984 ๐Ÿ› Springer ๐ŸŒ English โš– 573 KB
A deformational mechanism in particulate
A deformational mechanism in particulate-filled glassy polymers
โœ R. E. Lavengood; L. Nicolais; M. Narkis ๐Ÿ“‚ Article ๐Ÿ“… 1973 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 767 KB

The stress-strain behavior of glass bead-filled polystyrene, styrene-acrylonitrile, styrene-acrylonitrile-butadiene, and polyphenglene oxide composites is studied at various temperatures below their glass transition temperature. Earlier studies of beadfilled composites indicated that the addition of