✦ LIBER ✦

Mechanical properties of blends of nylon with chemically modified ABS

✍ Scribed by T. J. Nelson; N. Subramanian

Publisher: John Wiley and Sons
Year: 1993
Tongue: English
Weight: 361 KB
Volume: 32
Category: Article
ISSN: 0959-8103
DOI: 10.1002/pi.4990320403

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical properties of ABS/polycarbona

Mechanical properties of ABS/polycarbonate blends

✍ H. Suarez; J. W. Barlow; D. R. Paul 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 377 KB 👁 2 views

The mechanical properties of extruder compounded blends of ABS and polycarbonate in the form of extruded-sheet and injection-molded bars are reported and compared with commercial products based on these components. The modulus and tensile yield strength exhibit a nearly additive response to blend co

Mechanical properties of blends of polyc

Mechanical properties of blends of polycarbonate with unmodified and maleic anhydride grafted ABS

✍ Balakrishnan, S.; Neelakantan, N. R. 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 310 KB 👁 2 views

Blends of polycarbonate/acrylonitrileÈbutadieneÈstyrene terpolymer (PC/ABS) and polycarbonate/maleic anhydride grafted ABS (PC/MABS) were prepared over the whole range of compositions using a single-screw extruder. Tensile, Ñexural, notched Izod impact properties, and the heat deÑection temperature

Blends of nylon with polyethylene: Effec

Blends of nylon with polyethylene: Effect of compatibilization on mechanical and dynamic mechanical properties

✍ Rupali Gadekar; Asmita Kulkarni; J. P. Jog 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 306 KB 👁 2 views

Blends of Nylon 6 with very low density polyethylene (VLDPE) have been studied. The blends exhibit two phase morphology wherein VLDPE is dispersed in the form of spherical domains in Nylon 6 matrix. The water absorption of the blends decreased with increasing VLDPE content. The mechanical properties

Physical properties of ABS/SMA/nylon-6 t

Physical properties of ABS/SMA/nylon-6 ternary blends: effect of blending sequence

✍ Byung Kyu Kim; Young Min Lee; Han Mo Jeong 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 914 KB

Effect of dynamic vulcanization on prope

Effect of dynamic vulcanization on properties and morphology of nylon/SAN/NBR blends: A new compatibilization method of nylon/ABS blends

✍ Zhongjian Wang; Xiangfu Zhang; Yong Zhang; Yinxi Zhang; Wen Zhou 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 195 KB 👁 2 views

## Abstract Dynamically vulcanized blends of nylon, styrene–acrylonitrile copolymer (SAN), and nitrile–butadiene rubber (NBR) were examined for mechanical properties, Shore D hardness, Vicat softening temperature, impact process, and phase morphology. The effect of a curing system such as phenolic

Miscible and immiscible blends of ABS wi

Miscible and immiscible blends of ABS with PMMA. II. Mechanical and surface properties

✍ Byung Kyu Kim; Gui Sook Shin; Young Jin Kim; Tae Sung Park 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 433 KB