𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Mechanical and dynamical mechanical properties of chloroprene rubber and cellulose II composites

✍ Scribed by Agnes F. Martins; Sergio M. de Meneses; Leila L. Y. Visconte; Regina C. R. Nunes

Publisher
John Wiley and Sons
Year
2004
Tongue
English
Weight
95 KB
Volume
92
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Vulcanized composites of chloroprene rubber (CR) with cellulose II (Cel II) as a filler were investigated. Cel II, obtained by the coagulation of cellulose xanthate, was incorporated in the rubber by the traditional method. The filler content varied from 0 to 30 phr. For comparison purposes, carbon black (CB)–CR composites were also studied. The CB amount varied from 0 to 45 phr. The mechanical and dynamic mechanical properties were determined, and the CR composite containing 20 phr of Cel II showed the best set of properties. Β© 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2425–2430, 2004

πŸ“œ SIMILAR VOLUMES

Mechanical and dynamic mechanical proper
Mechanical and dynamic mechanical properties of waste rubber powder/HDPE composite
✍ J. I. Kim; S. H. Ryu; Y. W. Chang πŸ“‚ Article πŸ“… 2000 πŸ› John Wiley and Sons 🌐 English βš– 310 KB πŸ‘ 1 views

Mechanical and dynamic mechanical properties of a waste rubber powderfilled high-density polyethylene (HDPE) composite are investigated. Rubber powder is surface-modified with acrylamide (AAm) using ultraviolet. Rubber powder and HDPE are extruded using a single-screw extruder and maleic anhydride-g

Dynamic mechanical and mechanical proper
Dynamic mechanical and mechanical properties of polypropylene/poly(vinyl butyral)/mica composites
✍ Pirkko A. JΓ€rvelΓ€; Li Shucai; Pentti K. JΓ€rvelΓ€ πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 381 KB πŸ‘ 2 views

Three-component composites consisting of polypropylene (PP) matrix, poly-(vinyl butyral) (PVB) modifier, and mica filler at various ratios of matrix to modifies and a constant mica content (30 wt %) were prepared by using two different kinds of PVB, viz., PVB and PVB-P. By correlating with the morph

Blends of polyamide 6 and epichlorohydri
Blends of polyamide 6 and epichlorohydrin elastomers. II. Thermal, dynamic mechanical, and mechanical properties
✍ Silvia Carla GoΓ³s Da Costa; Maria Isabel Felisberti πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 193 KB πŸ‘ 2 views

The mechanical blending of polyamide 6 and epichlorohydrin elastomers, polyepichlorohydrin, PEPI, and poly(epichlorohydrin-co-ethylene oxide), ECO, is accompanied by grafting copolymerization. In this work the influence of the graft copolymer on the thermal and mechanical properties of the blends is