Interface and mechanical properties of peroxide cured silicate nanofiber/rubber composites
β Scribed by Ming Tian; Lijun Cheng; Liqun Zhang
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 314 KB
- Volume
- 110
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
## Abstract Vulcanized composites of chloroprene rubber (CR) with cellulose II (Cel II) as a filler were investigated. Cel II, obtained by the coagulation of cellulose xanthate, was incorporated in the rubber by the traditional method. The filler content varied from 0 to 30 phr. For comparison purp
## Abstract Longβfiber pellets were made by an __in situ__ pultrusion process. Fiberβreinforced composites were prepared by an injectionβmolding process and an extrusion/injectionβmolding method with pellets, respectively. SEM observations showed that the strong interface was maintained during the
Mechanical and dynamic mechanical properties of a waste rubber powderfilled high-density polyethylene (HDPE) composite are investigated. Rubber powder is surface-modified with acrylamide (AAm) using ultraviolet. Rubber powder and HDPE are extruded using a single-screw extruder and maleic anhydride-g