๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Measurement of unsteady gas flow under anisothermic conditions

โœ Scribed by L. V. Gulin; V. F. Shipitsin; P. V. Volobuev


Publisher
Springer US
Year
1983
Tongue
English
Weight
268 KB
Volume
44
Category
Article
ISSN
1573-871X

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


The self armouring process under unstead
โœ M. Nouh ๐Ÿ“‚ Article ๐Ÿ“… 1990 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 423 KB

Laboratory experiments were conducted to investigate the effect of the original size distribution of sediment and unsteady flow characteristics on the composition of an armour layer in a straight open flume. Bed sediments having different size distribution were subjected to flow hydrographs that var

Experimental investigation of bedload tr
โœ Kwan Tun Lee; Yi-Liang Liu; Kai-Hung Cheng ๐Ÿ“‚ Article ๐Ÿ“… 2004 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 365 KB

## Abstract Hydraulic engineering is usually based on theoretical analysis and/or numerical modelling simulation. As the dynamic behaviour of sediment movement under unsteady flow is still unclear, and field measurement is comparatively difficult during a large flood, prior investigations through f

Performance of catalytic processes under
โœ Yu.Sh. Matros ๐Ÿ“‚ Article ๐Ÿ“… 1990 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 492 KB

Works of the author with colleagues devoted to performance of catalytic processes in forced unsteady-state conditions in reactors with fixed bed of catalyst are briefly reviewed. Special attention is paid to periodic change of direction of reaction mixture passingthroughthe catalyst bedreverse-proce

Flow monitoring and permeability measure
โœ E. Heardman; C. Lekakou; M.G. Bader ๐Ÿ“‚ Article ๐Ÿ“… 2004 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 400 KB

This paper considers the technique of diverging radial flow for the measurement of the in-plane permeability of isotropic or inplane orthotropic porous media. Various causes for discrepancies and errors in the permeability thus determined are studied and finally a design for the experimental conditi