✦ LIBER ✦

Measurement of advancing and receding contact angles inside polymer tubing

✍ Scribed by W.G. Pitt; B.R. Young; S.L. Copper

Publisher: Elsevier Science
Year: 1987
Weight: 698 KB
Volume: 27
Category: Article
ISSN: 0166-6622
DOI: 10.1016/0166-6622(87)80156-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of Swelling of a Polymer Surface

Effect of Swelling of a Polymer Surface on Advancing and Receding Contact Angles

✍ R.V. Sedev; J.G. Petrov; A.W. Neumann 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 153 KB

Dynamic Cycling Contact Angle Measuremen

Dynamic Cycling Contact Angle Measurements: Study of Advancing and Receding Contact Angles

✍ C.N.C. Lam; R.H.Y. Ko; L.M.Y. Yu; A. Ng; D. Li; M.L. Hair; A.W. Neumann 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 286 KB

Dynamic cycling contact angle (DCCA) measurements of six liquids from two homologous series (i.e., alkanes and alcohols) on FC-732-coated silicon wafer surfaces were performed using automated axisymmetric drop shape analysis-profile (ADSA-P). Unlike the previous one-cycle measurements that have been

Effects of surfactants and polymers on a

Effects of surfactants and polymers on advancing and receding contact angles

✍ Barbara A. Johnson; Jörg Kreuter; George Zografi 📂 Article 📅 1986 🏛 Elsevier Science ⚖ 957 KB

Comments on “calculation of advancing an

Comments on “calculation of advancing and receding contact angles. I. Drops on inclined planes.”

✍ H.M Princen 📂 Article 📅 1971 🏛 Elsevier Science 🌐 English ⚖ 141 KB

Comments on “calculation of advancing an

Comments on “calculation of advancing and receding contact angles. I. Drops on inclined planes”

✍ H Lomas 📂 Article 📅 1971 🏛 Elsevier Science 🌐 English ⚖ 78 KB

The measurement of contact angles on cir

The measurement of contact angles on circular tubing surfaces using the captive bubble technique

✍ Lelah, Michael D. ;Grasel, Timothy G. ;Pierce, Jeffrey A. ;Cooper, Stuart L. 📂 Article 📅 1985 🏛 John Wiley and Sons 🌐 English ⚖ 332 KB

Circular tubings are used extensively in biomedical implants and devices. It is desirable to determine contact angles on the inner or outer surfaces of such tubing in its final fabricated form. In this study, a technique for the measurement of contact angles on tubing surfaces in an aqueous environm