✦ LIBER ✦

Mathematical description of the softening temperature of poly(vinyl chloride) blends with solid-state chlorinated polyethylene

✍ Scribed by L. Vlaev; S. Stoeva; V. Georgieva

Book ID: 106444476
Publisher: Springer Netherlands
Year: 2005
Tongue: English
Weight: 127 KB
Volume: 81
Category: Article
ISSN: 0022-5215
DOI: 10.1007/s10973-005-0787-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Study of poly(vinyl chloride) blends wit

Study of poly(vinyl chloride) blends with solid-state chlorinated polyethylene

✍ S. Stoeva 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 496 KB 👁 1 views

## Abstract The influence of solid‐state chlorinated polyethylene of various chlorine content and residual crystallinity on the mechanical properties of rigid poly(vinyl chloride) has been studied. The impact strength of poly(vinyl chloride) was found to increase significantly as 10–20 mass% chlori

Translucent blends of chlorinated polyet

Translucent blends of chlorinated polyethylene with poly(vinyl chloride)

✍ A. Tse; R. Laakso; E. Baer; A. Hiltner 📂 Article 📅 1991 🏛 John Wiley and Sons 🌐 English ⚖ 960 KB

## SYNOPSIS Some experimental chlorinated polyethylene ( CPE ) resins that produced translucent blends with PVC were used to study the effects of CPE chlorine content and chlorine distribution on the morphology, optical clarity, and toughness of blends with PVC. The CPE resins were characterized i

Thermal Deformation of Blends of Poly(Vi

Thermal Deformation of Blends of Poly(Vinyl Chloride) with Chlorinated Polyethylene

✍ R. D. Maksimov; T. Ivanova; J. Zicans 📂 Article 📅 2003 🏛 Springer US 🌐 English ⚖ 84 KB

Compatibilization of chlorinated polyeth

Compatibilization of chlorinated polyethylene/poly(vinyl chloride) blends with epoxidized natural rubber

✍ Stathis N. Koklas; Dionissia D. Sotiropoulou; John K. Kallitsis; Nikos K. Kalfog 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 565 KB

Blends of poly(vinyl chloride) with acry

Blends of poly(vinyl chloride) with acrylonitrile-chlorinated polyethylene-styrene copolymer. II. Mechanical properties

✍ Zhikai Zhong; Sixun Zheng; Kejia Yang; Qipeng Guo 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 220 KB 👁 2 views

Blends of poly(vinyl chloride) (PVC) and acrylonitrile-chlorinated polyethylene-styrene (ACS) graft copolymer were prepared by melt blending. Mechanical properties were studied by the use of dynamic mechanical analysis (DMA), impact tests, tensile tests, and scanning electron microscopy (SEM). The D

Comparison of the toughening mechanisms

Comparison of the toughening mechanisms of poly(vinyl chloride)/chlorinated polyethylene and poly(vinyl chloride)/acrylonitrile–butadiene–styrene copolymer blends

✍ Liling Zhou; Xin Wang; Yusheng Lin; Jingyi Yang; Qiye Wu 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 623 KB

## Abstract In this study, the influence of chlorinated polyethylene (CPE) and acrylonitrile–butadiene–styrene copolymer (ABS) on the mechanical properties of poly(vinyl chloride) (PVC)/CPE and PVC/ABS hybrids were examined. The experimental results show that the toughness of the hybrids could be m