Techniques of the magnetic force control have been examined for industrial application. The problems and the technique are different in dispersion medium of gas and that of liquid. In addition, the method is different depending on the magnetic characteristic of the target objects. In case of the liquid, the dispersion medium having different viscosity was examined. The separation speed is decided with the magnitude of the magnetic force because a drag force increases with the viscosity. When the water is the dispersion medium, magnetic seeding is possible and hence the nonmagnetic materials can be separated and even the dissolved material could be separated. The separation technique has been used for purifying the waste water form paper mill or wash water of drum. On the other hand when the water is not dispersion medium, mainly the ferromagnetism particle becomes the target object because the magnetic seeding becomes difficult. The iron fragments have been separated from the slurry of slicing machine of solar battery. It has been clarified high gradient magnetic separation (HGMS) can be applied for the viscous fluid of which viscosity was as high as 10 Pa s. When the dispersion medium is gaseous material, the air is important. The drag force from air depends greatly on Reynolds number. When speed of the air is small, the Reynolds number is small, and the drag force is calculated by the Stokes' law of resistance. The study with gaseous dispersion medium is not carried out much. The magnetic separation will discuss the possibility of the industrial application of this technique.