The design of a narrowband MIC filter using the high-Q lumped resonators is presented. The unloaded Q-factor of the lumped resonator estimated by theory and experiment is about 150 at 2.44 GHz. A two-section bandpass filter prototype is designed and tested. This filter demonstrates a maximum inserti
Lumped element equivalent circuit for the cymbal resonator bandpass filter
✍ Scribed by James R. Kelly; Rob D. Seager; Thomas Wong
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 260 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This article presents an equivalent circuit for the microstrip cymbal bandpass filter (Strassner and Chang, Microwave Opt Technol Lett 28 (2001), 33–34; Strassner and Chang, IEEE Trans Microwave Theory Techn 50 (2002), 1431–1432), together with an ABCD matrix. The circuit models the frequency response of the filter accurately. A set of polynomial equations were also developed as a design aid. These equations give the equivalent circuit component values. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2381–2384, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23671
📜 SIMILAR VOLUMES
## Abstract The derivation of a lumped‐element equivalent circuit of a device is a fundamental topic in electronic and electromagnetic analysis. Here, a fully automatic genetic algorithm is devised and implemented to perform this task. The proposed method not only recovers the values of the lumped
A new equivalent circuit for inverters is presented. Using this circuit, expression for the elements of the coupling matrix of narrow RF band pass filters is derived. The derivation is based on frequency independent coupling assumed in the synthesis of narrow RF band pass filters. Our expression is
## Abstract In this article, a novel microstrip dual‐passband bandpass filter has been proposed and developed. This filter is composed of two modified short‐circuit quarter‐wavelength resonators with a half‐wavelength stepped‐impedance resonator. Design procedures and theoretical analysis are provi