The effects of lubricating-oil additive zinc dialkyldithiophosphate (ZDDP) on the friction and wear properties of polymers and their composites sliding against GCr15 bearing steel were studied by using an MHK-500 ring-on-block wear tester (Timken wear tester). Then the frictional surfaces of the fri
Lubrication performance of multialkylatedcyclopentane oils for sliding friction of steel under vacuum condition
โ Scribed by Masuko, Masabumi ;Mizuno, Hideaki ;Suzuki, Akihito ;Obara, Shingo ;Sasaki, Akira
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 274 KB
- Volume
- 24
- Category
- Article
- ISSN
- 0265-6582
- DOI
- 10.1002/jsl.41
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
The friction and wear properties of polytetrafluoroethylene (PTFE), polyimide (PI), and polyamide 66 (PA66) sliding against GCr15 bearing steel under both dry and oil-lubricated conditions were studied by using an MHK-500 ring-block wear tester (Timken wear tester), and then Stribeck's curves of PTF
Five kinds of polytetrafluoroethylene (PTFE)-based composites were prepared: PTFE, PTFE ฯฉ 30 vol % SiC, PTFE ฯฉ 30 vol % Si 3 N 4 , PTFE ฯฉ 30 vol % BN, and PTFE ฯฉ 30 vol % B 2 O 3 . The friction and wear properties of these ceramic particle filled PTFE composites sliding against GCr15 bearing steel u
Four kinds of polytetrafluoroethylene (PTFE)-based composites, such as pure PTFE, PTFE / 30 (vol.)% carbon fiber, PTFE / 30(vol.) % glass fiber, and PTFE / 30(vol.)% K 2 Ti 6 O 13 whisker composite, were prepared. The friction and wear properties of these fiber-and whisker-reinforced PTFE composites
Polytetrafluoroethylene (PTFE)-based composites, filled with CeO 2 , CeF 3 , and La 2 O 3 in volume contents of 5, 10, 15, 20, and 30%, were prepared. Then, the friction and wear behavior of these PTFE composites sliding against GCr15 bearing steel under both dry and liquid paraffin-lubricated condi