𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Low profile meander line Printed Quadrifilar Helix Antenna

✍ Scribed by Zenghui Yang; Qunsheng Cao; Zhenhua Chen


Book ID
107504121
Publisher
SP Science Press
Year
2011
Tongue
English
Weight
208 KB
Volume
28
Category
Article
ISSN
0217-9822

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Low-profile broadband printed quadrifila
✍ Yen-Yu Chen; Kin-Lu Wong πŸ“‚ Article πŸ“… 2002 πŸ› John Wiley and Sons 🌐 English βš– 128 KB

## Abstract This paper presents a low‐profile broadband design of a printed quadrifilar helical antenna for the application as a broadcasting satellite receiving antenna in the frequency range of about 2.3 to 2.7 GHz. The antenna comprises four parallel printed strips excited in phase quadrature an

Compact dual-band printed square quadrif
✍ Li Zheng; Steven (Shichang) Gao πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 835 KB

## Abstract A miniaturized dual‐band printed square quadrifilar helix antenna (QHA) is proposed for global navigation satellite systems (GNSS) receivers applications.The antenna consists of four printed helices forming a cube with a very small size of 1 cm^3^ only. It can cover both L1 and L2 bands

Design of a small, low-profile print ant
✍ Takashi Terada; Kazuki Ide; Kazuki Iwata; Takeshi Fukusako πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 571 KB

## Abstract This article describes a small, low‐profile linear antenna that is fed at the tip of a half‐wavelength element to maintain the input impedance high with a metallic reflector at a position near the antenna. A CPW‐like port at one end of a linear element yields a capacitive coupling with

Low-profile broadband printed VHF monopo
✍ Saou-Wen Su; Yung-Tao Liu; Kin-Lu Wong; Chia-Lun Tang πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 72 KB

## Abstract A novel low‐profile broadband printed monopole antenna suitable for VHF operations on vehicles is presented. The proposed monopole antenna is printed on a flexible printed circuit board and then folded onto a cylindrical foam base. A constructed prototype suitable for operation in the 2