✦ LIBER ✦

Kinetic and mathematical approaches to the corrosion of mild steel in nitric acid

✍ Scribed by Anees A. Khadom,Ali A. Abdul-Hadi

Book ID: 121555831
Publisher: Springer-Verlag
Year: 2014
Tongue: English
Weight: 368 KB
Volume: 112
Category: Article
ISSN: 1878-5190
DOI: 10.1007/s11144-014-0683-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Kinetics of Mild Steel Corrosion in Aque

Kinetics of Mild Steel Corrosion in Aqueous Acetic Acid Solutions

✍ S.K. Singh; A.K. Mukherjee 📂 Article 📅 2010 🏛 Allerton Press Inc 🌐 English ⚖ 744 KB

Kinetics of the mild steel corrosion pro

Kinetics of the mild steel corrosion protection by polypyrrole-oxalate coating in sulfuric acid solution

✍ Branimir N. Grgur; Predrag Živković; Milica M. Gvozdenović 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 468 KB

The corrosion of mild steel in acetic ac

The corrosion of mild steel in acetic acid-containing atmospheres

✍ H.C.D. Alves; M.G.S. Ferreira 📂 Article 📅 1992 🏛 Elsevier 🌐 English ⚖ 452 KB

Green approach to corrosion inhibition o

Green approach to corrosion inhibition of mild steel in hydrochloric acid and sulphuric acid solutions by the extract of Murraya koenigii leaves

✍ M.A. Quraishi; Ambrish Singh; Vinod Kumar Singh; Dileep Kumar Yadav; Ashish Kuma 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 900 KB

The corrosion kinetics of mild steel in

The corrosion kinetics of mild steel in the presence of cyanoguanidine formaldehyde resins

✍ M.I. Selim; A.A. Yassin; B.G. Ateya 📂 Article 📅 1977 🏛 Elsevier Science 🌐 English ⚖ 361 KB

Corrosion of mild steel in acid solution

Corrosion of mild steel in acid solutions containing thiourea and thiosemicarbazide

✍ Dr. W. Khalil; M. S. A. Abdou; I. A. Ammar 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 463 KB

## Abstract Cathodic polarization curves for mild steel in 1.0 N H~2~SO~4~ and 1.0N HCl, containing various concentrations of thiourea (TU) (1–25 mM) and thiosemicarbazide (TSC) (0.2–25 mM), were measured in the temperature range 20–50 °C. The apparent activation energy for corrosion (ΔE\*) was cal