𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Ka-band substrate integrated waveguide voltage-controlled Gunn oscillator

✍ Scribed by Zhou Cao; Xiaohong Tang; Kewei Qian


Book ID
102950408
Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
509 KB
Volume
52
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

A Ka‐band substrate integrated waveguide (SIW) voltage‐controlled oscillator (VCO) is demonstrated using GaAs Gunn diode.GaAs hyperabrupt varactor is employed in parallel to the Gunn diode for low phase noise and wideband tuning. The VCO achieves a tuning range of more than 1 GHz by varying the varactor tuning voltage between 0 V and 9 V, and phase noise of −102.1 dBc/Hz at 1 MHz offset from a 36 GHz carrier frequency. The output power varies from 9.3 dBm to 11.3 dBm within the tuning range. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 1232–1235, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.25169


📜 SIMILAR VOLUMES


Parallel type substrate integrated waveg
✍ Cuilin Zhong; Jun Xu; Zhiyuan Yu; Junhong Li 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 368 KB

## Abstract Based on the substrate integrated waveguide (SIW) technology, a parallel‐type Gunn diode oscillator was developed. SIW resonant cavity structure was emphasized. Restrictions on the performance of the oscillators imposed by packaged networks and the self‐characteristic of the Gunn diode

High-performance low-power 27-GHz CMOS v
✍ Mei-Ling Yeh; Yao-Chian Lin; Chung-Cheng Chang 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 243 KB

## Abstract A new low‐power 27.07‐GHz voltage controlled oscillator is designed for Ka‐band applications in this article. Body bias technique is used for the low‐power and low‐phase noise VCO design. The VCO can be tuned from 26.35 to 27.102 GHz. The measured phase noise is −106.2 dBc/Hz at 1 MHz o