✦ LIBER ✦

J-Integral estimate for small edge and interior cracks

✍ Scribed by W.K. Wilson

Publisher: Elsevier Science
Year: 1984
Tongue: English
Weight: 635 KB
Volume: 20
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(84)90040-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

J-integral estimation analysis for circu

J-integral estimation analysis for circumferential throughwall cracked pipes

✍ Akram Zahoor 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 582 KB

The contour integral method for loaded c

The contour integral method for loaded cracks

✍ Pereira, J. P. ;Duarte, C. A. 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 163 KB

A comparison of the use of the modified

A comparison of the use of the modified J-integral and the deformation J-integral in procedures for estimating the critical crack length for CANDU pressure tubes

✍ E. Smith 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 745 KB

The virtual crack extension method for e

The virtual crack extension method for evaluation of J- and Ĵ-integrals

✍ N. Miyazaki; T. Watanabe; G. Yagawa 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 752 KB

The equation for evaluating the nonlinear fracture mechanics parameters J-and jintegrals are derived using the virtual crack extension method. The validity of the equations derived here are checked by solving several numerical examples, that is, the J-integral analyses of compact tension specimen an

Numerical investigations of crack closur

Numerical investigations of crack closure integral and J-integral calculations for a thermally stressed specimen

✍ F.-G. Buchholz; H. Grebner; U. Strathmeier 📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 735 KB

An analytical study of J-integral estima

An analytical study of J-integral estimation formula for a straight-through cracked three-point bend round beam specimen

✍ Wang Qizhi 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 313 KB

In this paper, the elastic deflection formula for a straight-through cracked three-point bend round beam is derived using an analytical method. If the crack tip plastic zone or fracture process zone is localized near the crack, its effect on the load line deflection can be considered through proper