✦ LIBER ✦

Iron moulds for casting brass

Publisher: Elsevier Science
Year: 1913
Tongue: English
Weight: 62 KB
Volume: 176
Category: Article
ISSN: 0016-0032
DOI: 10.1016/s0016-0032(13)90769-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The magnetic susceptibility and iron con

The magnetic susceptibility and iron content of cast red brass

✍ L.H. Marshall; R.L. Sanford 📂 Article 📅 1923 🏛 Elsevier Science 🌐 English ⚖ 104 KB

Adaptive mould level control for continu

Adaptive mould level control for continuous steel slab casting

✍ T. Hesketh; D.J. Clements; R. Williams 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 1001 KB

Using an LQ design method an adaptive controller suitable for application in a noisy environment with poor excitation is successfully applied to continuous casting of steel slabs.

Cast iron for enameling purposes

📂 Article 📅 1928 🏛 Elsevier Science 🌐 English ⚖ 101 KB

Micro-mould fabrication for a micro-gear

Micro-mould fabrication for a micro-gear via vacuum casting

✍ Y. Tang; W.K. Tan; J.Y.H. Fuh; H.T. Loh; Y.S. Wong; S.C.H. Thian; L. Lu 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 708 KB

A micro-mould fabrication method based on vacuum casting was developed and its functionality and reproducibility were demonstrated. The micro-components used in this study were SU-8 photoresist micro-gears fabricated by UV photolithography. These micro-gears served as the master patterns from which

Ductile cast iron for cryogenic use

📂 Article 📅 1963 🏛 Elsevier Science 🌐 English ⚖ 134 KB

Wet-process enamels for cast iron

✍ R.R. Danielson; H.P. Reinecker 📂 Article 📅 1924 🏛 Elsevier Science 🌐 English ⚖ 137 KB

WET-PROCESS enamelling of cast iron is becoming of importance because of its application to the enamelling of stove parts, sanitary fittings, and hardware. This paper is a report of an extended investigation of wet-process enamels for cast iron, both with and without the use of ground coat. Composit