Intelligent Manufacturing and Energy Sustainability: Proceedings of ICIMES 2019 (Smart Innovation, Systems and Technologies, 169)

✍ Scribed by A.N.R. Reddy (editor), Deepak Marla (editor), Milan Simic (editor), Margarita N. Favorskaya (editor), Suresh Chandra Satapathy (editor)

• Publisher: Springer
• Year: 2020
• Tongue: English
• Leaves: 844
• Category: Library

✦ Synopsis

This book includes selected, high-quality papers presented at the International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES 2019)held at the Department of Mechanical Engineering, Malla Reddy College of Engineering & Technology (MRCET), Maisammaguda, Hyderabad, India, from 21 to 22 June 2019. It covers topics in the areas of automation, manufacturing technology and energy sustainability.

✦ Table of Contents

Conference Committee
Chief Patron
Patrons
Conference Chair
Honorary Chair
Publication Chair
Convener
Organizing Chair
Organizing Secretary
Coordinators
Session Chairs
Organizing Committee
Web Developer
Proceedings Committee
Technical Program Committee
Publicity Committee
Registration Committee
Hospitality Committee
Sessions Committee
Certificate Committee
Decoration Committee
Transportation Committee
International and National Advisory Committee
Preface
Contents
About the Editors
Performance Evaluation of Multi-layer Barriers for Machine-Induced Low-Frequency Noise Attenuation
1 Introduction
2 Mathematical Model
3 Experiment Methodology
4 Results and Discussion
5 Conclusion
References
Planing Process on AISI S-1006, S-7, and S-4340, Based on Johnson–Cook Model Using Numerical Technique
1 Introduction
1.1 Modeling Techniques and Assumptions
2 Results and Discussion
3 Conclusions
References
An Analytical Study of Diametral Error in Simultaneous Turning Process
1 Introduction
2 Formulation of Diametral Error of Workpiece with Cutting Tools kept Opposite to Each Other
3 Comparison of Analytical Model with Literature
4 Conclusion
References
Improvement of Electric Heater Design for Household Cooking Application in Developing Countries
1 Introduction
2 Experiment Methodology
3 Results and Discussion
4 Conclusions
References
Embodiment of an Efficient Brown’s Gas Compound Fuel Tank
1 Introduction
2 Literature Survey
3 Materials and Methods
3.1 HHO Module Design
3.2 Tank Design and Development
4 Water Flow Sensor Results and Discussions
5 Conclusions
References
Automated Solar Photovoltaic Panel Cleaning/Cooling System Using Air–Water Mixture and Sustainable Solutions to Off-Grid Electrification
1 Introduction
2 Proposed Methodology
2.1 Automation of Solar Panel Cleaning and Cooling System
3 Results and Discussion
4 Conclusions
References
Design and Fabrication of Four-Way Multi-hacksaw Cutting Machine
1 Introduction
2 Fabrication
3 Working
3.1 Working Principle
4 Design Calculations
5 Cost Analysis
6 SWOT Analysis
7 Conclusions
References
Adhesion Strength of Plasma Sprayed Coatings—A Review
1 Introduction
1.1 Selection Criterion in Plasma Sprayed Coatings
2 Adhesion Strength of Plasma Sprayed Coatings
3 Conclusions
References
An Experimental Studies on the Polymer Hybrid Composites—Effect of Fibers on Characterization
1 Introduction
2 Materials and Methods
2.1 Fabrication of Composites
3 Results and Discussions
4 Conclusion
References
Design Analysis and Pressure Loss Optimization of Automobile Muffler
1 Introduction
1.1 Backpressure
1.2 Effects of Increased Back Pressure
2 Methodology
3 Geometry
3.1 Meshing
3.2 Assumption and Boundary Conditions
4 Results and Discussions
4.1 Inlet Velocity: Case 1: 39 M/S
4.2 Inlet Velocity: Case 2: 44 M/S
4.3 Inlet Velocity: Case 3: 49 M/S
5 Conclusion and Future Work
References
Different Modules for Car Parking System Demonstrated Using Hough Transform for Smart City Development
1 Introduction
2 Technology Gap
3 Background
4 Hough Transform
4.1 Find Circle Using Hough Transform
5 IP Webcam
6 Proposed Method
6.1 Step-by-Step Procedure
7 Simulation Results
7.1 Circle with Different Radius—Parallel Parking
7.2 Circle with the Same Radius, Angle Parking
8 Conclusion and Future Work
References
Effect of Arrangement and Number of Water Mist Spray Nozzles on Air Humidity
1 Introduction
2 Equipment Modification
3 Results and Discussion
4 Conclusions
References
Vibration Condition Monitoring of Spur Gear Using Feature Extraction of EMD and Hilbert–Huang Transform
1 Introduction
2 Gear Vibration Signals
3 Time–Frequency Representations
3.1 HHT
4 Results and Discussions
4.1 EMD
4.2 HSA and FFT
5 Conclusion
References
Comparative Study of PWM Technique for Switching Loss Reduction and Acoustic Noise Reduction in VSI-Fed Drives
1 Introduction
2 Advanced PWM Scheme
3 Switching Loss
4 Acoustic Noise Prediction
5 Simulation Results and Discussions
6 Conclusion
References
An Improved Genetic Algorithm for Production Planning and Scheduling Optimization Problem
1 Introduction
2 Research Methodology
2.1 Problem Modelling
2.2 Chromosome Encoding
2.3 Notations
2.4 Evaluation
2.5 Selection
2.6 Crossover
2.7 Mutation
3 Case Study
4 Experimental Results and Discussion
5 Conclusion
References
Automatic Calibration for Residential Water Meters by Using Artificial Vision
1 Introduction
2 Equipment Description
3 Instrument Measurement
4 Results
5 Conclusions
References
Hardware-in-the-Loop of a Flow Plant Embedded in FPGA, for Process Control
1 Introduction
2 Development of the HIL
2.1 The Flow Plant Design
2.2 Implementation of the Flow Plant
3 Controller Design
3.1 Design of the Continuous PID Controller
3.2 Design of the Discrete PID Controller
4 Tests and Results
4.1 Tests
4.2 Results
5 Conclusions
References
Error Diagnosis in Space Navigation Integration Using Wavelet Multi-Resolution Analysis with General Regression Neural Network
1 Introduction
2 Inertial Navigation Systems
2.1 Prediction of Errors in GPS
2.2 Parameters Obtained
3 Wavelet Analysis
4 Neural Networks
5 Result and Discussion
6 Conclusion
References
Hydromagnetic Squeeze Film Performance of Two Conducting Longitudinally Rough Elliptical Plates
1 Introduction
2 Analysis
3 Results and Discussions
4 Conclusion
References
Performance and Emission Characteristics of Biodiesel from Rapeseed and Soybean in CI Engine
1 Introduction
2 Literature Review
3 Methodology
4 Results and Discussion
4.1 Brake Power
4.2 Specific Fuel Consumption
4.3 Brake Thermal Efficiency
4.4 NOx Emission
4.5 CO2 Emission
4.6 Particulate Matter Emission
5 Conclusion
References
A Practical Approach to Camera Calibration for Part Alignment for Hybrid Additive Manufacturing Using Computer Vision
1 Introduction
1.1 Problem Identification
1.2 Camera Calibration
2 Literature Review
3 Experimentation
3.1 Setup
3.2 Results
3.3 Result Table
4 Conclusion
5 Future Work
References
Development of a Colour and Orientation Detection System for Small Part Feeding
1 Introduction
2 Experimental Setup
2.1 Colour Sensor
2.2 Infrared Sensor
2.3 Servo-Based Actuator
2.4 Microcontroller
3 Description of Algorithm Used in Code
3.1 Mean of a Set of 10 Readings of Colour Sensor to Reduce the Error
3.2 Identification of the Colour from the Mean RGB Values
3.3 Taking the Mean of 10 Infrared Sensor Values for More Accuracy and Sensing the Orientation of the Parts
3.4 Condition for Rejection of the Undesirable Part by the Actuator
4 Working
5 Conclusion
References
Comparative Analysis on Battery Used in Solar Refrigerated E-Rickshaw in India
1 Introduction
2 Smart Mobility System for Indian Megacities
3 BMS Duty for Li-Ion Battery Use in E-Rickshaw and SHRERs
4 The Relation Between State of Function with SOC and SOH
5 Conclusion
References
Application of Value Stream Mapping (VSM) in a Sewing Line for Improving Overall Equipment Effectiveness (OEE): A Case Study
1 Introduction
1.1 General
1.2 Objectives
2 Literature Review
2.1 Case Studies
2.2 Conceptual Work
2.3 Modeling Work
2.4 Survey Articles
3 Methodology
3.1 Current State VSM
3.2 Rough Set Theory
3.3 Future State VSM
4 OEE and Other Performance Parameters
4.1 Formula Used
4.2 OEE Calculation
4.3 Existing Scenario
4.4 Proposed Scenario
4.5 Calculation of Other Performance Parameters
5 Result and Conclusion
References
CFD Analysis to Increase Heat Transfer in Pipe with Combined Effect of Circular Perforated Ring and Twisted Tape Insert
1 Introduction
2 Numerical Model Description
2.1 Geometrical Model
2.2 Governing Equations
3 Results and Discussion
4 Conclusion
References
Study on Solar Parabolic Trough Collector with Different Copper Absorber Tubes
1 Introduction
2 Experimental Setup
2.1 Absorber Tubes
3 Experimentation
4 WASPAS Method
5 Results and Discussions
6 Observations
References
Harmonic Analysis for Bidirectional Grid-Connected Converter for Electrical Vehicle During Charging and Discharging Operations
1 Introduction
2 Grid-Connected Converter
3 Simulation Results
4 Conclusion
References
Effect of Tribo-layer on the Sliding Wear Behavior of Detonation Sprayed Alumina–Titania Coatings
1 Introduction
2 Methodology
2.1 Sample Preparation
2.2 Powder Preparation
2.3 Process Parameters
2.4 Coating Characterization
3 Results and Discussion
3.1 Surface Roughness, Microstructure and Porosity Values of Coatings
3.2 XRD Analysis
3.3 MicroHardness Values
3.4 Sliding Wear Behavior
3.5 Coefficient of Friction Values
3.6 Wear Mechanisms
3.7 EDS Analysis of Worn Surfaces
4 Conclusions
References
Development of Sustainable Cementitious Binder Utilizing Silicomanganese Fumes
1 Introduction
2 Methodology of Research
2.1 Materials
2.2 Experimental Program
2.3 Evaluation Methods
3 Results and Discussion
3.1 Flow
3.2 Setting Time
3.3 Compressive Strength
4 Conclusion
References
Review on Sliding Wear of Ti–6Al–4V Alloy Concerning Counterface and Sliding Conditions
1 Introduction
2 Literature Review
2.1 Microstructures
2.2 Coatings
2.3 Heat and Surface Treatment
2.4 Ti–6Al–4V Against Same and Different Alloys
3 Discussion and Result
4 Conclusion and Future Scope of Work
References
Hardness and Microstructure Studies on the Effect of Solution-Treated Age-Hardened Al-6082 Alloy
1 Introduction
2 Material Selection
3 Heat Treatment
4 Hardness Test
5 Result and Discussion
5.1 Hardness and Microstructure Results of Experiment No. 1
5.2 Hardness and Microstructure Results of Experiment No. 2
5.3 Hardness and Microstructure Results of Experiment No. 3
5.4 Hardness and Microstructure Results of Experiment No. 4
5.5 Hardness and Microstructure Results of Experiment No. 5
6 Conclusion
References
Floating Photovoltaic Thin Film Technology—A Review
1 Introduction
2 Floating photovoltaic (FPV) Technology
2.1 Design Requirements
2.2 Concepts
3 Thin Film Technology
3.1 Commercial Thin Film Technologies in Practice
3.2 Future Thin Film Technologies
4 Conclusion
References
Effect of Ethanol Fumigation on Performance and Combustion Characteristics of Compression Ignition Engine Fuelled with Used Cooking Oil Methyl Ester in Dual-Fuel Mode
1 Introduction
1.1 Present Work
2 Materials and Methods
2.1 Source
2.2 Trans-esterification of UCO
3 Experimental Set-Up
3.1 Details of Ethanol Fumigation Rate
3.2 Details of Energy Sharing of Ethanol
4 Results and Discussions
4.1 Effect of Ethanol on Engine Performance
4.2 Effect of Ethanol on Combustion Analysis
5 Conclusions
References
Estimation and Moderation of Harmonics in Distribution Systems
1 Introduction
2 Estimation of Harmonics
3 Mitigation of Harmonics
3.1 Harmonic Reduction Using Pulse Converters
4 Proposed Method
5 Result and Analysis
6 Conclusion
References
Theoretical Evaluation of Energy Performance of a Vapour Compression Refrigeration System Using Sustainable Refrigerants
1 Introduction
2 Materials and Methods
2.1 Development of Sustainable Alternative Refrigerants
3 Methodology
3.1 Thermodynamic Analysis of Alternative Refrigerants
4 Results and Discussion
4.1 Energy Efficiency Ratio
4.2 Discharge Temperature of Compressor
4.3 Power Spent Per Ton of Refrigeration
4.4 Volumetric Refrigeration Capacity
5 Conclusions
References
Effect of Autofrettage on the Properties of the Aluminium Cylinders
1 Introduction
2 Experimental Studies
3 Result and Discussion
4 Conclusion
References
Influence of Graphene and Tungsten Carbide Reinforcement on Tensile and Flexural Strength of Glass Fibre Epoxy Composites
1 Introduction
2 Literature Review
3 Materials
4 Methodology
5 Experimental Study
5.1 Tensile Strength
5.2 Flexural Strength
6 Results and Discussions
6.1 Effect of Fibre Loading on Tensile Properties of Composites
6.2 Effect of Fibre Loading on Flexural Properties of Composites
7 Conclusion
References
Investigation of Partial Discharge Due to Copper Spherical Particle in Power Transformer Under Various Oil Flow Models Using CFD
1 Introduction
2 Simulation
2.1 Analysis Under Non-directed Oil Flow System
2.2 Analysis of Directed Oil Flow System
3 Discussions and Conclusions
References
A High-Power High-Frequency Isolated DC Power Supply for Electric Vehicle Charging Application
1 Introduction
2 Proposed Topology of EV Power Supply
2.1 T-type Converter Topology
3 Charge Controller
4 Efficiency Calculation
5 Simulation Results and Discussions
5.1 Dynamic Load Test
5.2 Charging of Battery Pack
6 Conclusion
References
Effect of Slicing Thickness and Increment on the Design of Patient Specific Implant for Total Knee Replacement (TKR) Using Magnetic Resonance Imaging (MRI)—A Case Study
1 Introduction
2 Methodology
2.1 Creating a 3D Model of Knee
2.2 Optimization of Data
3 Results and Discussion
4 Conclusions
References
Microstructure and Hardness Behaviour Study of Carbon Nanotube in Aluminium Nanocomposites
1 Introduction
2 Materials and Methodology
3 Synthesizing of Al–Cnt Metal Matrix Composites
4 Microstructural Analysis
5 Hardness Test
6 Results and Discussions
7 Conclusions
References
Comparison of Electric Fields with and Without Corona Ring for 66 kV Line Insulators
1 Introduction
2 Methodology
2.1 Numerical Methods
2.2 Calculation of Electric Field
3 Modelling
3.1 Properties of Different Materials
3.2 Model
4 Result and Discussion
4.1 Without Corona Ring
4.2 With Corona Ring
5 Conclusion
References
Experimental and FEA Simulation of Thermal-Fluid Interaction Between TIN Coated Tungsten Carbide Tool and Inconel-825 Workpiece
1 Introduction
2 Design of Experiment and Experimentation
3 Multiple Regression Model
4 Geometry and Mesh Model
4.1 Dry and Wet Condition
5 Results and Discussion
5.1 Dry and Wet Cutting Condition
6 Conclusions
References
The Effect of Recrystallization on Electrical Resistivity of Stir Casted SiCP/AA6061 Composite After Shot Peening
1 Introduction
2 Materials and Methods
3 Results and Discussion
3.1 Microstructural Examination
3.2 XRD Analysis
3.3 Electrical Resistivity
4 Conclusions
References
Design and Modeling of Wye Piece
1 Introduction
2 Modelling Using CATIA and Hypermesh
3 Meshing and Boundary Conditions Using Hypermesh
4 Analysis Results
5 Conclusions
6 Future Scope
References
Comparative Investigation on Gas Tungsten Arc Welding and Friction Stir Welding of Electrolytic Tough Pitch Copper Plates
1 Introduction
2 Materials and Methods
2.1 Material
3 Result and Discussion
4 Conclusion and Further Scope
References
Synthesis and Characterization of Functionally Graded Ceramic Material for Aerospace Applications
1 Introduction
2 Experimentation
2.1 Slip Casting
3 Results
3.1 Dielectric Constant
3.2 Density
3.3 Compressive Strength
3.4 Scanning Electron Microscope (SEM) Analysis
4 Conclusion
References
CI Engine Characteristic Investigation by Application of Metal-Based Additives with Biodiesel Blends
1 Introduction
2 Experimental Setup
3 Methodology
3.1 Production of Biodiesel from Waste Cooking Oil (WCO)
3.2 Determination of Fuel Properties
3.3 Preparation of Nanofluids
4 Results and Discussion
4.1 Performance Parameter
4.2 Combustion Parameter
5 Emission Analysis
5.1 Oxides of Nitrogen
5.2 Carbon Monoxide
5.3 Unburnt Hydrocarbon
5.4 Smoke Opacity
6 Conclusion
References
Simulation of Underground Cable Defects with the Detection of Partial Discharge
1 Introduction
2 Cable Defects
2.1 What Is Cable Defects?
2.2 Cause of Cable Defects
3 Results and Discussion
3.1 Void
3.2 External Cut
3.3 Termination and Left Out Completely
4 Conclusion
References
Comparison of C.I Engine Performance Parameters and Emissions by Varying Designs of Intake Manifolds
1 Introduction
2 Experimental Set-Up
2.1 Engine Specifications
3 Designs of Manifolds
3.1 Normal Manifold
3.2 Nozzle Inside the Inlet Manifold
3.3 Internal Threaded Manifold
4 Tabular Columns for Experimental Results
5 Results and Discussions
6 Conclusions
References
Variation of Time Lag, Decrement Factor and Inside Surface Temperature with Solar Optical Properties of Building Envelope in Different Climatic Zones of India
1 Introduction
1.1 Time Lag and Decrement Factor
2 Methodology
2.1 Sole Air Temperature
2.2 Climatic Zones of India
2.3 Time Lag and Decrement Factor Calculation
3 Results and Discussion
3.1 Time Lag and Decrement Factor Calculation
3.2 Electricity Saving
4 Conclusions
References
Study on Tensile and Hardness Properties of Aluminium 7075 Alloy Reinforced with Graphite, Mica and E-Glass
1 Introduction
2 Materials and Process
2.1 Materials
2.2 Process
2.3 Hardness Test
2.4 Tensile Test
3 Result and Discussion
3.1 Tensile Strength and Hardness
3.2 Signal-to-Noise Ratio
3.3 Analysis of Variance (ANOVA)
3.4 Microstructure Studies
4 Conclusion
References
ANN-Based Fault Classification and Section Identification Technique Using Superimposed Currents for Three-Terminal Transmission Line
1 Introduction
2 System Modelling
3 Feature Selection for Section Identification and Fault Classification
4 Results and Discussion
5 Conclusion
References
An Analytical Investigation for Combined Pressure-Driven and Electroosmotic Flow Without the Debye–Huckel Approximation
1 Introduction
2 Description of the Physical Problem
3 Mathematical Formulation
3.1 Poisson–Boltzmann Equation
3.2 Momentum Equation
3.3 Energy Equation
4 Solution of the Governing Equations
4.1 Electric Potential Distribution
4.2 Velocity Distribution
4.3 Temperature Distribution
5 Results and Discussion
6 Conclusion
References
Addressing the Green Tribology Advancement, Future Development, and Challenges
1 Introduction
1.1 Global Sustainable Development
2 Green Tribology Fields in Engineering
3 Utility of Green Tribology in Real Life
4 Green Tribology Development Direction
5 Current Status of Energy Loss Due to Friction and Wear Worldwide
6 Results and Discussions
7 Conclusions
References
Effect of Drying Temperature to the Thin Layer Drying Model of Sago Starch
1 Introduction
2 Materials and Methods
2.1 Sample Preparation
2.2 Drying Experiment
2.3 Data Analysis and Mathematical Modeling
3 Results and Discussions
3.1 Effect of Drying Temperature to the Drying Curve of Traditionally Processed Sago Starch and Drying Characteristic
3.2 Effect of Drying Temperature to the Fitting Drying Model of Traditionally Processed Sago Starch
4 Conclusions
References
Evaluating Mechanical Properties of Egg Shell, and Coco Peat Reinforced Epoxy Composite
1 Introduction
2 Methods
2.1 Preparation of Composite Material
2.2 Testing of Composite Material
3 Results and Discussions
3.1 Tensile Test
3.2 Compressive Test
3.3 Hardness Test
4 Conclusions
References
Design Modification of Rear Axle Housing by Fatigue Failure Analysis
1 Introduction
2 CAD and FE Model Description
3 Axle Housing Material
4 Loading Condition
5 Finite Element Analysis of Housing and Results
6 Theoretical Validation
7 Design Optimization
8 Results and Discussion
9 Conclusions
References
Mixture Design Using Low-Cost Adsorbent Materials for Decolourisation of Biomethanated Distillery Spent Wash in Continuous Packed Bed Column
1 Introduction
2 Materials and Methods
2.1 Collection and Bio-chemical Analysis of BDSW
2.2 Preparation and Characterisation of Biosorbent Carrier Materials
2.3 Batch Experiments
2.4 Continuous Column Flow Studies
2.5 Decolourisation Assay
2.6 Nutritional Analysis of Spent Modified Soil
3 Results and Discussion
3.1 Characteristics of BDSW
3.2 Properties of Biosorbent
3.3 Colour Degradation
3.4 Nutritional Quality of Spent Modified Soil
4 Conclusion
References
Prediction of the WPPO Biodiesel-Fuelled HCCI Engine Using Artificial Neural Networks
1 Introduction
2 Experimental Setup
3 Results and Discussion
3.1 Modelling with ANN
4 Conclusion
References
Dimensional Analysis of Form Drilling Parameters by Buckingham Pi Theorem and Optimization of Heat Generation in Form Drilling Process by Taguchi
1 Introduction
2 Literature Survey
3 Experimental Setup
4 Pi Terms Evaluated
4.1 Process Parameters
5 Results and Discussion
5.1 Analysis of Variance for Heat Generation
5.2 Analysis of Variance for Petal Height
5.3 Taguchi Analysis for Heat Generation
5.4 Taguchi Analysis for Petal Height
6 Conclusion
References
Comparison of Ductile, Flexural, Impact and Hardness Attributes of Sisal Fiber-Reinforced Polyester Composites
1 Introduction
1.1 Materials and Methods
1.2 Fabrication of Specimen
2 Mechanical Testing
2.1 Tensile Strength
2.2 Flexural Strength
2.3 Impact Strength and Hardness
3 Scanning Electron Microscope (SEM)
4 Results and Discussions
4.1 Ductile Properties
4.2 Flexural Properties
4.3 Impact Properties
4.4 Hardness Properties
5 Analysis of SEM
6 Conclusions
References
Optimization of EDM Process Parameters Using Standard Deviation and Multi-objective Optimization on the Basis of Simple Ratio Analysis (MOOSRA)
1 Introduction
2 Experimental Environment
3 Methodology
3.1 Optimization Problem
3.2 Standard Deviation Concept for Weight Calculation
3.3 MOOSRA Methodology
4 Results and Discussion
4.1 Allocation of Weights
4.2 Result Analysis
5 Conclusion
References
Modeling and Simulation of Trans Z-Source Inverter with Maximum Constant Boost PWM Control for Solar PV System
1 Introduction
2 T-Source Inverter
2.1 Equivalent Circuit and Operating States of TSI
3 Modeling of TSI-Based Solar PV System
4 Maximum Constant Boost PWM Control (MCB PWM)
5 Simulation Results and Discussion
5.1 Simulation Results of TSI for Solar PV System Using MCB PWM Algorithm
6 Conclusion
References
Driver Drowsiness Monitoring System
1 Introduction
2 Literature Survey
3 Proposed System
3.1 Eye Blink Detection
3.2 Yawn Detection
3.3 Head Location Analysis
4 Result
5 Conclusion
References
Detection and Control of Water Leakage in Pipelines and Taps Using Arduino Nano Microcontroller
1 Introduction
2 Methodology
3 Arduino Nano
4 Water Flow Sensor
5 Water Drop Sensor
6 Liquid Crystal Display
7 Relay
8 Solenoid Valve
9 Experimental Set-up
10 Conclusions
References
Smart Automated Processes for Bottle-Filling Industry Using PLC-SCADA System
1 Introduction and Background Theory
2 Proposed Methodology
2.1 SCADA Implementation of Bottle-Filling Industry
2.2 Warehouse Management Systems
2.3 Energy-Efficient Lighting Solutions
3 Results and Analysis
3.1 SCADA Implementation of Bottle-Filling Industry
3.2 Warehouse Management Systems
3.3 Energy-Efficient Lighting Solutions
4 Conclusion
References
Effect of Stirring Speed During Casting on Mechanical Properties of Al–Si Based MMCs
1 Introduction
2 Experimental Procedure
2.1 Casting
2.2 Impact Test
2.3 Tensile Strength Test
2.4 Compression Strength Test
2.5 Hardness Test
3 Results and Discussion
4 Conclusion
References
Exploration of Pillars of Industry 4.0 Using Latent Semantic Analysis Technique
1 Introduction
2 Methodology
2.1 Latent Semantic Analysis (LSA)
3 Results and Discussion
3.1 Data Selection and Analysis
3.2 Interpretation of Results
3.3 Pillars of Industry 4.0
4 Conclusions and Implications
References
An Overview of Different Topologies of DC/DC Bidirectional Converter for Different Applications
1 Introduction
2 Overview of Different Topologies
3 Conclusion
References
An Approach to Detect and Classify Defects in Cantilever Beams Using Dynamic Mode Decomposition and Machine Learning
1 Introduction
2 Methodology
2.1 Simulation, Data Acquisition, and Analysis
2.2 Dynamic Mode Decomposition
2.3 Support Vector Machines
3 Results and Discussions
4 Results and Discussions
References
Musculoskeletal Simulation and Analysis of Upper Limb Rehabilitation Device
1 Introduction
2 Materials and Methods
2.1 Upper Limb Rehabilitation Device Selection and Setting
2.2 Musculoskeletal Analysis using AnyBody Software
3 Results and Discussion
4 Conclusion
References
Fuzzy Regenerative Braking Strategy
1 Introduction
2 Vehicle Dynamics and Braking
3 Mathematical Model of Energy Regeneration
4 Braking Strategy
5 Design of Fuzzy Logic Controller
6 Simulation Results and Discussions
7 Conclusion
References
A New Framework for Secure Outsourcing of Medical Data
1 Introduction
2 Paper Organization
3 Related Work
4 Proposed System Architecture
5 Algorithms
5.1 Least Significant Bit
5.2 BlowFish Algorithm
5.3 SHA-256
6 Results
7 Security Challenges
8 Conclusion and Future Work
References
A Comprehensive View for Providing the Decision on Medicare Data
1 Introduction
2 Literature Survey
3 Recommended System for Providing the Decision on Medicare Data
3.1 Sources of Healthcare Claims Data
3.2 Analysis of Medicare Data
3.3 Development Phase
4 Experimental Results
5 Conclusion and Future Work
References
Predicting Cardiac Arrhythmia Using QRS Detection and Multilayer Perceptron
1 Introduction
2 Literature Survey
3 Prediction System Architecture
3.1 Data Preprocessing
3.2 Multilayer Perceptron
3.3 QRS Detection
4 Algorithms
4.1 Pan–Tompkins Algorithm
4.2 Multilayer Perceptron
5 Dataset
6 Implementation
7 Results
8 Conclusion
References
Full Length Driver Drowsiness Detection Model—Utilising Driver Specific Judging Parameters
1 Introduction
2 System Architecture
3 Implementation
3.1 Facial Landmarks
3.2 Eye Aspect Ratio
3.3 Mouth Aspect Ratio
3.4 Drowsiness Predication
4 Experimental Results
5 Conclusion and Future Work
References
Enterprise Reporting Solution on Integrating Business Intelligence for Operational and Financial Data
1 Introduction
2 Survey of Existing Models
3 Architecture of Analytical Reporting Using Business Intelligence
3.1 Detailed Design, ER (Entity Relationship) Diagram
4 Implementation
5 Conclusion
References
A Survey on Accelerating the Classifier Training Using Various Boosting Schemes Within Cascades of Boosted Ensembles
1 Introduction
2 Boosting Chain Learning
2.1 Booster Cascade
2.2 Cascade Training
2.3 Tuning the Boosting Cascade
2.4 Learning the Naive Booster Chain Framework
2.5 Using Bootstrap for Boosting Chain Learning
3 Optimization of Boosting Chain
3.1 Booster Optimization Based on a Linear Model
3.2 Adjusting the Classifier
3.3 Removal of Redundancy in Boosting
4 Performance Comparisons of the Three Detectors
5 Observations of Empirical Outcomes
6 Conclusion
References
Service Layer Security Architecture for IOT Using Biometric Authentication and Cryptography Technique
1 Introduction
2 Related Works
2.1 System Architecture
2.2 Algorithm (Honey Encryption)
3 AVISPA Code
4 Result Analysis
5 Conclusion and Future Work
References
Author Index