Integrated Computer Technologies in Mechanical Engineering - 2022: Synergetic Engineering (Lecture Notes in Networks and Systems, 657)

✍ Scribed by Mykola Nechyporuk (editor), Vladimir Pavlikov (editor), Dmitriy Kritskiy (editor)

• Publisher: Springer
• Year: 2023
• Tongue: English
• Leaves: 778
• Category: Library

✦ Synopsis

The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering”―Synergetic Engineering (ICTM) was established by National Aerospace University “Kharkiv Aviation Institute.” The Conference ICTM’2022 was held in Kharkiv, Ukraine, during November 18–20, 2022. During this conference, technical exchanges between the research community were carried out in the forms of keynote speeches, panel discussions, as well as special session. In addition, participants were treated to a series of receptions, which forge collaborations among fellow researchers. ICTM’2022 received 137 papers submissions from different countries. All of these offer us plenty of valuable information and would be of great benefit to experience exchange among scientists in modeling and simulation. The organizers of ICTM’2022 made great efforts to ensure the success of this conference. We hereby would like to thank allthe members of ICTM’2022 Advisory Committee for their guidance and advice, the members of program committee and organizing committee, and the referees for their effort in reviewing and soliciting the papers, and all authors for their contribution to the formation of a common intellectual environment for solving relevant scientific problems. Also, we grateful to Springer―Janusz Kacprzyk and Thomas Ditzinger as the editor responsible for the series “Lecture Notes in Networks and Systems” for their great support in publishing these selected papers.

✦ Table of Contents

International Scientific and Technical Conference
Contents
Aerospace Engineering
Technology of Holes Strengthening by Pneumo-Impulse Hole Mandrelling
1 Introduction
2 Enhancing the Strength by Surface Plastic Deformation Methods
3 Technological Model of Pneumo-Impulse Hole Mandrelling
4 Results and Discussion
5 Conclusion
References
Experimental Setup with Stand-Alone Automatic Modular Logger of Parameters of Thermal Pulse Processing
1 Introduction
2 Development of a Stand-Alone Automatic Modular Parameter Logger
3 Hardware-Software Complex for Registration of Experimental Data
4 Experimental Setup with Stand-Alone Automatic Modular Parameter Logger
5 Conclusion
References
Estimation of the Minimum Uncut Chip Thickness Utilising Conventional Milling of S960QL and C45E Steels
1 Introduction
2 Design of Experiment and the Cutting Tests
3 Data Evaluation
4 Conclusion
References
Theoretical Foundations of Physical Modeling of the Descent and Landing Process of Controlled Precision Airborne Cargo Landing Systems
1 Introduction
2 Analysis of Modern Aviation Needs for Flight Researches of Critical Flight Modes and Special Flight Situations Arising During the Flight Operation of CPACLS
3 FDSM as a Design Object, a Technological Object and Flight Research Tool. Modern Concepts of Formation and Quality Control of a FDSM
4 Features of Application of Basic Provisions of Similarity Theory for Substantiation of Possibility of Creation a FDSM of a CPACLS and Carrying Out Flight Researches on Them. Criteria and Scale of Similarity in the Task of Forming the Required Quality of a FDSM of a CPACLS
5 Formalization of the System of Connections Imposed on the Similarity Scale of the Main Parameters of the Full-Scale CPACLS and Its FDSM
6 Similarity Scales of the Basic Parameters of a Full-Scale CPACLS and Its FDSM While Satisfying Possible Combinations of Similarity Criteria
7 Secondary Scales of Similarity of Parameters and Characteristics in Modeling the Flight of a Full-Scale CPACLS on Its FDSM
8 Conclusions
References
Algorithm of Computational Modeling the Self-heating Process of Pneumatic Tire in Operation
1 Introduction
2 Main Idea of Algorithm
3 Determination of Deformation Cycles
4 Calculation of Heat Load
4.1 Algorithm of Calculation Heat Generation Function
4.2 Strain Cycles Approximation
4.3 Determination of the Heat Generation Function
5 Solving of Stationary Heat Conduction Problem
6 Conclusions
References
Recent Advances in Development and Characterization of CVD Multilayer Composite Coatings—A Comprehensive Review
1 Introduction
2 A Survey of Trends in Development Processes of Multilayers Composite Coatings
3 Development of Composite Layers Coated Tools with Improved Performance
4 Coating Structure
4.1 Single Layer Coatings
4.2 Complex Multi-layers Coating
4.3 Gradient and Nanostructured Coatings
5 Conclusion
References
Adhesive Joint Optimization. Application of Bezier Curves for Structural Shape Description
1 Introduction
2 Problem Formulation
2.1 Mathematical Model of Stress State
2.2 Optimization Problem
2.3 Genetic Algorithm of Optimization
3 Numerical Realization and Results
4 Conclusion
References
Study of Drilling Cutting Modes Impact on Shrinkage and Surface Roughness of Holes in Composite Materials
1 Introduction
2 Literature Review and State-of-the-Art
3 Purpose and Objectives of the Study
4 Experimental Procedures
5 Results of Studying the Holes Shrinkage and Surface Roughness in Composite Laminates
5.1 Results of Holes Experimental Studying in Specimens Made of ELUR-P-1,0, T-10–14, and T42/1–76
5.2 Results of the Carbon Fiber Specimens Experimental Studies Made of UOL-300-1A Tape
6 Conclusion
References
Influence of Physico-Mechanical Factors on Residual Technological Stresses and Strains of Composite Panels
1 Introduction
2 Literature Review
3 Research Methodology
4 Results
5 Conclusions
References
Control of Stress Conditions in Growth of Copper Oxide Nanostructures
1 Introduction
2 Materials and Methods
3 Experimental Results and Discussion
4 Conclusions
References
Required Geometric Parameters of Inflatable Air Shock Absorbers of Parachute Platforms Bench Dynamically Similar Models
1 Introduction
2 Literature Review on Operating Conditions and Loads Acting on Inflatable Air Shock Absorbers of Parachute Platforms and Modeling Features on DSM
3 Criteria and Scale of Similarity in the Task a Creating BDSM and Execution Experimental Researches of NO Landing on It
4 Results of Using the Similarity Theory and Theory of Calculation of Thin-Walled Shells of Rotation to Determine the Wall Thicknesses of Air Shock Absorbers of BDSM
5 Conclusions
References
Shape of Part Edges with the Various Surface Finish of the Adjacent Surfaces
1 Introduction
2 The State-of-the-Art and the Study Purpose
3 Study of Relationship Between the Adjacent Surfaces Microrelief Orientation (Lay) and the Edge Shape
4 Study of Edge Shape for the Different Combinations of Adjacent Surfaces Lay
5 Study of the Edge Rounding Minimum Possible Radius for the Different Combinations of the Adjacent Surfaces Lay
6 Conclusion
References
Study of a Geometry Accuracy of the Bracket-Type Parts Using Reverse Engineering and Additive Manufacturing Technologies
1 Introduction
2 Literature Review and State-of-the-Art
3 Purpose and Objectives of the Study
4 Experimental Procedures
4.1 Creating a “Digital Portrait” (a Point Cloud) of the Aircraft Transmission Bracket and Its Digital Mock-Up (3D Model) of the Specified Geometry
4.2 The Aircraft Transmission Bracket 3D Printing at Selected Process Modes
4.3 Realization of the 3D Printed Aircraft Transmission Bracket Inspection by Comparing Its “Digital Portrait” and Digital Mock-Up
5 Conclusion
References
Design of High Fatigue Life Joints of Fuselage Structures Considering Fracture Mechanics
1 Introduction
2 Modern Principles of Designing Fuselage Joints
2.1 Residual Strength and Crack Growth
2.2 Inspection Program
2.3 Widespread Fatigue Damage
3 Fuselage Joints of Tail Section
4 Discussion
References
Analysis of Gluing Assembly Defects of Ultra-Thin Composite Face Sheets with Honeycomb Core
1 Introduction
2 Literature Review
3 Research Methodology
4 Experimental Research
5 Results
6 Conclusions
References
Information Technology for Determining the Flight Performance of a Paraglider Wing
1 Introduction
2 Classification
3 Paragliding Design Technique
4 Algorithm for Determining the Performance Characteristics of a Paraglider Wing
5 Software Architecture
6 Conclusion
References
Information Modeling
Research of Mathematical Models Based on Optimization Paraboloid and Alternative Method of Regression
1 Introduction
2 Literature Analysis and Problem Statement
3 Methods and Materials
3.1 Initial Dataset Preprocessing
3.2 Approximation Using a Parabola of the Second Degree
3.3 Approximation Using a Hyperbolic Curve
3.4 Approximation Using an Exponential Function
3.5 Approximation Using the Method of Least Absolute Deviations
4 Comparative Analysis of Alternative Mathematical Models
5 Conclusions
References
A Model of a Transport Multi-section Conveyor Based on a Neural Network
1 Introduction
2 Formal Problem Statement
3 Analytical Model of the Conveyor Section
4 Conveyor Section Model Using a Neural Network
5 Preparation of a Data Set for Training a Neural Network
6 Prediction Model Analysis
7 Conclusion
References
Simulation of the Impact of Migration Caused by the Russian War in Ukraine on the Dynamics of COVID-19 in Poland
1 Introduction
2 Materials and Methods
3 Results
4 Conclusions
References
Limiting Properties of Boundary Value Problems Solutions for Some Higher-Order Equations
1 Introduction
2 Problem Statement
3 Results
3.1 Theorem
3.2 Remark
3.3 Proof
4 Conclusions
References
Method for Correcting the Mathematical Model in Case of Empirical Data Asymmetry
1 Introduction
2 Literature Analysis and Problem Statement
3 Methods and Materials
4 Conclusions
References
Model for Determining the Ballistic-Temporal Characteristics of the Movement of a Controlled Parachute System
1 Introduction
2 Classification of Tasks for Motorized and Non-motorized Controlled Parachute Systems
3 Formalized Model Determining Time-Ballistics Characteristics of Controlled Parachute Systems
4 Conclusion
References
Design Improvements of an Industrial Centrifugal Fan Based on the Computer Mathematical Simulation
1 Introduction
1.1 Fan Design
1.2 The Modern Approaches to the Analysis of the Fan Structural Strength
2 Problem Formulation
2.1 Calculation Model
2.2 Finite-Element Model
2.3 Bearing Capacity
3 Results and Discussion
3.1 Static Strength Analysis
3.2 Modal Analysis
3.3 Bearing Capacity
4 Conclusions
References
Bagging Model for Heart Stroke Detection
1 Introduction
2 Materials and Methods
3 Results
4 Conclusions
References
Modification of the Goland-Reissner Overlapped Adhesive Joint Model to Describe Stress Values in Circular Joints
1 Introduction
2 Formulation of the Problem
3 Construction of the Solution
3.1 Gluing Area
3.2 Outside of the Gluing Area
3.3 Boundary Conditions
4 Model Problem
5 Conclusion
References
Stress State of the Adhesive Joint with Longitudinal Defect. Analytical and Finite Element Models
1 Introduction
2 Formulation and Solution of the Problem
2.1 Basis Equations
2.2 Constructing a Solution to the Problem
3 Model Problem
4 Conclusions
References
Modeling the Structure of an Aggregation of Toxic Cyanobacteria When Planning Their Elimination from the Air
1 Introduction
2 Problem Statement
3 Research Methodology
4 Results
5 Discussion
6 Conclusions
References
Information Technology in the Design and Manufacture of Engines
Thermal Analysis of Functionally Graded Dry Clutch Disc Subjected to Characteristic Parameters Effects
1 Introduction
2 Formulation of the Problem
2.1 Basic Equations
2.2 Materials and Methodology
2.3 Finite Element Model and Boundary Conditions
3 Numerical Results
4 Conclusions
References
Application of Markov Processes Theory for Computational Prediction of Turbine Blade Reliability
1 Introduction
2 The Current State of the Problem
2.1 Overview of Markov Processes
2.2 Definition of Characteristic Functions
3 Algorithm and Methods of Determination of Turbine Blade Reliability
4 Processing of Results
5 Summary
References
Calculation of Velocity and Temperature of Nickel Powder Particles in a Supersonic Nozzle During Low-Pressure Cold Spraying
1 Introduction
2 Brief Review of Key Cold Spaying Parameters
3 One-Dimension Isentropic Model
4 Calculation Results and Discussion
5 Conclusions
References
Numerical Simulation of Strength and Aerodynamic Characteristics of Small Wind Turbine Blades
1 Problem Statement
2 Materials and Methods
3 Results and Discussion
4 Conclusion and Further Research
References
Integrated Computer Modeling of Dynamic Processes in Rotor Machines and Systems with Elastic-Damper and Magnetic Bearings
1 Introduction
2 Literature Review
3 The Aim of the Research
4 The Subject of Research and Mathematical Formulation
4.1 Dynamic System for Analysis
4.2 Mathematical Formulation of Rotor Dynamics
5 Integrated Software Tool for Calculating Rotor Dynamics
6 Calculation Results and Program Verification
6.1 Dynamic Analysis of the Rotors of ECU
6.2 Dynamic Analysis of the Rotors in Passive-Active Magnetic Suspension
7 Discussion and Conclusion
References
Influence of Using Different Material Models of an Aircraft Gas Turbine Engine Fan Blade and a Bird when Simulating the Dynamics of a Collision Process in Flight
1 Introduction
2 Literature Review
3 Object and Aim of Research
4 Calculation Model, Preconditions and Analysis Algorithm
4.1 Finite Element Model, Constraints and Initial Conditions
4.2 Material Models
4.3 Preliminary Loading Conditions for Blades and Calculation Sequence
5 Impact Simulation of a Straight-Flying Bird and a Rotating Fan Wheel
6 Validation of Results According to Experimental Data
7 Discussion and Conclusion
References
Optimization of the Small Horizontal Axis Wind Turbine Blade Based on the Interactive Design Approach
1 Introduction
2 Structure and Blade Design
2.1 Design Wind Turbine
2.2 Finite Element Model
3 Results and Discussions
4 Conclusions and Future Works
References
Simulation of Aircraft Engine Dynamic Effect on Aircraft Wing Caused by a Fan Blade-Off
1 Introduction
2 Development of Models of Bearings and Bearing Supports
3 Development of Models of Engine Rotors and Stator
4 Development of a Finite Element Model of an Engine Mount
5 Numerical Analysis of Engine Vibration with a Fan Blade-Off
6 Conclusion
References
Nano-Modeling
Numerical Simulation of the Steady Creep of Single-Crystal Alloys
1 Introduction
2 Creep Theory of Monocrystalline Alloy
3 Method for Identification of Material Parameters for Creep Model
4 The Results of Approximation of the Creep Curves of the Monocrystalline Alloy ZhS-32
5 Conclusions
References
Substrate Thickness as a Control Factor in Growth of Copper Oxide Nanostructures
1 Introduction
2 Theoretical Model
3 Results and Discussion
4 Conclusions
References
Project Management and Business Informatics
Space Law: Current Situation and Development in Ukraine and Latvia
1 Introduction
2 Literature Review
3 Main Content Presentation
4 Conclusions
References
Legal Support of Economic Activity in the Conditions of the Pandemic
1 Introduction
2 Literature Review
3 Main Content Presentation
3.1 Special Legal Regime as a Means of Legal Regulation of Economic Relations
3.2 Special Regime of Economic Activity in a Pandemic as a Means of Overcoming the Pandemic
3.3 Special Legislation in the Field of Economic Activity in a Pandemic
4 Conclusions
References
Methodological Approaches to the Management of Ecological Safety of Acoustic Environment in the Territories of Urban Systems
1 Introduction
2 Formulation of the Problem for the Development of Architectural and Planning Solutions to Reduce Noise Pollution at the Level of Urban Systems
3 Results of Experimental Data on the Influence of Infrastructure Networks at the Level of Urban Systems
4 Conclusion
References
The Effect of Sanctions Against the Background of the Russian Occupation of Ukraine
1 Introduction
2 Literature Review
3 Main Content Presentation
3.1 The Role of Sanctions and Its Impact on the Russian Economy
3.2 How Are the Sanctions Affecting Russian Economy?
4 Conclusion
References
Use of Information Systems in Disclosure of Criminal Offenses
1 Introduction
2 Main Content Presentation
3 Conclusion
References
Artificial Intelligence in Labor Relations: Prospects for Evolution of Labor Laws
1 Introduction
2 Automation of Workplaces and Introduction of Artificial Intelligence as the Main Factors in Changing Nature and Labor Structure
3 Neurotechnologies and Labor
4 Conclusions
References
Scientific Approaches to Reforming Staff Management of State Forensic Science Institutions of the Ministry of Justice of Ukraine
1 Introduction
2 Literature Review
3 Main Content Presentation
3.1 Concept of HR Management as Part of Formation of Professionals Team. Tasks, Methods, Functions, Principles of HR Management
3.2 Analysis of Current Regulations of HR Management of State Forensic Science Institutions of the Ministry of Justice of Ukraine
3.3 HR Department of State Forensic Science Institution of Ministry of Justice of Ukraine and the Need to Reform It in Order to Create a HR Management Unit
3.4 Reforming Regulatory Framework for HR Management of State Forensic Science Institutions of the Ministry of Justice of Ukraine
3.5 Ways to Improve Training and Retraining of Forensic Staff of State Forensic Science Institutions of the Ministry of Justice of Ukraine
4 Research Results
5 Conclusion
References
Clustering of Patients with Diabetes Mellitus Using Expectation-Maximization Algorithm
1 Introduction
2 Materials and Methods
3 Results
4 Conclusions
References
Synergetic Approach and Issues of Criminological Science Methodology
1 Introduction
2 Main Content Presentation
3 Conclusions
References
Evaluation of Effectiveness the Innovative Diffusion of the Socio-economic Systems
1 Introduction
2 Authentication of Determinants of the Effectiveness of Innovative Diffusion of Socio-economic Systems
3 Forming of the Indexes System the Evaluation of Effectiveness the Innovative Diffusion of the Socio-economic Systems
4 An Evaluation of Influence the Effectiveness of Innovative Diffusion on Potential Development of the Socio-economic Systems
5 Conclusions
References
Particular Aspects of International Cooperation of Ukrainian Forensic Science Institutions with Foreign Specialists in Collecting, Studying and Processing Human Genomic Information and Conducting Molecular Genetic Analysis
1 Introduction
2 Literature Review
3 Main Content Presentation
4 Conclusions
References
Analysis of Project Implementation Methods and Models Throughout Risk Management
1 Introduction
2 The Importance of Risk Management Activities
3 Generalized Network Models
4 Probabilistic Network Models
4.1 Characteristics Field of Use of Probabilistic Models
5 Alternative Network Models
6 Deterministic Network Models
7 Accounting for Resource Constraints and Optimizing Their Use
8 Conclusions
References
Robotics and UAV
Analysis of the Architecture of Perceiving a Dynamic Environment for an Unmanned Aerial Vehicle
1 Introduction
2 Indicators for Assessing the Quality of Programs and Methods of Pattern Recognition
3 Information Processing Methods for Extracting Data
4 Software Analysis
5 Features of Perceiving a Dynamic Environment for an Unmanned Aerial Vehicle
6 Conclusions
References
Research of Human-Machine Interaction on the Example of the “Operator-UAV” System
1 Introduction
2 Literature Review
3 Materials and Methods
4 Results
4.1 Operator’s Stress Tolerance Study
4.2 Operator’s Resource Study
4.3 The Viability of the “Operator-UAV” System Study
5 Methods for Reducing Risks in the Work of UAV Operators
6 Conclusion
References
Signal and Image Processing
A Fast Procedure for Image Lossy Compression by ADCTC Using Prediction of Distortions’ MSE
1 Introduction
2 ADCTC and Test Images
3 Analysis of Distortion Statistics
4 Proposed Prediction Algorithm and Its Testing
5 Conclusions
References
Comparison of Noisy Medical Image Lossy Compression by BPG and AGU
1 Introduction
2 Lossy Compression Coders
2.1 BPG Encoder
2.2 AGU Encoder
3 Test Images for Simulation
3.1 Image Properties
3.2 Noise Models
4 BPG and AGU Compression Methods Analysis
5 Conclusions
References
Lossy Compression of Three-Channel Remote Sensing Images Based on Controlled Visual Quality
1 Introduction
2 Visual Quality Metrics
3 Method of Providing a Controlled Visual Quality
3.1 Lossy Compression Encoders
3.2 Basic of Providing a Controlled Visual Quality
4 Approaches to Lossy Compression of Remote Sensing Images
5 Visual Quality Control Method for 3D Version of AGU
6 Accuracy Analysis of Visual Quality Control
7 Conclusions
References
Smart Energy and Grids
Pump Assistant Ground-Source Two-Phase Thermosiphon for the Heating and Cooling of Households
1 Introduction
2 Theory
2.1 Concept
2.2 Power Consumption
2.3 Other Aspects
3 Experimental
4 Results and Discussion
5 Conclusions
References
Software Engineering and IT-Infrastructure
Development of Integrated CAD/CAE Systems Based on Parameterization of the Simulated Process
1 Introduction
2 Analysis of Functional Possibilities and Problems of Using CAD/CAE Systems in Modeling the Billet Stress-Strain State
3 The Method of Selecting the Scheme and Parameters of Billet Deformation Using Parametric Models
4 Development of Mathematical Models of SPD RS-180 and RS-60 Processes for Building a Parametric Model of Die Equipment
5 Patterns of Influence of the Scheme and Die Parameters on the Change in the Billet Shape During SPD
6 Conclusion
References
Cooperative Navigation of Personal Electronic Devices Formation Movement
1 Introduction
2 Formation of Personal Electronic Devices
3 Localization of PED Inside of the Formation
4 Data Time Synchronization
5 Collaborative Data Processing
6 Numerical Demonstration
7 Conclusion
References
Using Multilayer Neural Networks to Predict the Output Flow Parameters of Multi-section Conveyor
1 Introduction
2 Problem Statement
3 Literature Review
4 Main Material
5 Results
6 Conclusion
References
Architecting Autonomous Underwater Vehicles by Adapting Software Product Lines
1 Introduction
2 Software Product Lines for Cyber-Physical Systems
3 Extending the Feature-Model Metamodel for Cyber-Physical Attributes
4 The Life Cycle of Product Lines for Cyber-Physical Systems
5 Conclusions
References
Transport Systems and Logistics
Study of the Formation of Passenger Flows in Transport Hubs
1 Introduction
2 Literature Review
3 Research Methodology
4 Results and Discussion
5 Conclusions
References
Analysis of the Possibility of Using Analytical Methods to Model the Risks and Consequences of Transport Events in the Transport of Dangerous Goods by Railway Transport
1 Introduction
1.1 Problem Statement
2 The Purpose and Tasks of the Research
3 Presenting Main Material
4 Conclusions and Suggestions
References
An Air Traffic Safety Management Based on Probabilities
1 Introduction
2 Probability-Based Approach
3 Risk of Preplanned Trajectory Loss
4 Numerical Demonstration
5 Conclusion
References
Author Index