𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of the operation time on the performance of a new SCR monolithic catalyst

✍ Scribed by J. Blanco; P. Avila; A. Bahamonde; M. Yates; J.L. Belinchón; E. Medina; A. Cuevas

Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
326 KB
Volume
27
Category
Article
ISSN
0920-5861

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of coating geometry on the eff
Influence of coating geometry on the effectiveness of monolithic catalysts
✍ Cheng-Tung Chou; Warren E. Stewart 📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 265 KB

Monolithic reactors are manufactured by coating a perforated ceramic block with a slurry of the catalytic material. The coatings can be made quite uniform, except that there is a tendency for fillets to form in the comers of the ducts as shown in Fig. 1. This communication is concerned with the infl

The inhibiting effect of extra-framework
The inhibiting effect of extra-framework Al on monolithic Co-ZSM5 catalysts used for NOx SCR
✍ A.V. Boix; E.E. Miró; E.A. Lombardo; J.L.G. Fierro 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 557 KB

Co-zeolite catalysts are active for the NO x selective reduction with CH 4 . For practical purposes, they should be in the form of monoliths and a binder should be added to firmly attach the Co-zeolite powders to the monoliths. The incorporation of Al(NO 3 ) 3 as a binder to the Co-ZSM5/ cordierite

Cyclic operation of reaction systems: th
Cyclic operation of reaction systems: the influence of diffusion on catalyst selectivity
✍ J.E. Bailey; F.J.M. Horn 📂 Article 📅 1972 🏛 Elsevier Science 🌐 English ⚖ 833 KB

Periodic operation of a catalyst pellet can produce greater selectivity than steady-state operation even when diffusional mass transfer resistance is very large. For the example discussed here improved selectivity is obtained at a switching frequency which is small enough to provide adequate penetra