𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of the degree of pore saturation on the resistivity of concrete and the corrosion rate of steel reinforcement

✍ Scribed by W. López; J.A. González


Publisher
Elsevier Science
Year
1993
Tongue
English
Weight
490 KB
Volume
23
Category
Article
ISSN
0008-8846

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Theoretical considerations on the suppos
✍ J. Gulikers 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 425 KB 👁 1 views

Theoretical considerations on the supposed linear relationship between concrete resistivity and corrosion rate of steel reinforcement J. Gulikers\* Traditionally, the assessment of service life of steel reinforced concrete structures has been focused on the prediction of the time required to achieve

The prediction of corrosion rates of rei
✍ H. Yalçyn; M. Ergun 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 393 KB

The effect of chloride and acetate ions on corrosion of steel in concrete was studied. The reinforcement corrosion was evaluated by measuring the corrosion potentials and corrosion current density using linear polarization resistance technique. The initial corrosion rates (i,,) of reinforcing steel

The influence of internal relative humid
✍ J.N. Enevoldsen; C.M. Hansson; B.B. Hope 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 571 KB

Once corrosion of reinforcing steel has been initiated, the internal relative humidity and electrical resistivity of the concrete cover are two of the factors controlling active corrosion. To determine this influence, simultaneous measurements of corrosion rate, electrical resistivity and internal r

Modelling of reinforcement corrosion – I
✍ E. Bohner; H.S. Müller 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 180 KB 👁 1 views

## Abstract Since the initiation stage of the damage process due to reinforcement corrosion had been successfully investigated in the recent past, the damage progress in the propagation stage is currently in the focus of research. This work deals with the mechanisms of cracking and spalling due to

The effects of various formwork surfaces
✍ S. Subaşı; M. Arslan; G. Durmuş 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 German ⚖ 448 KB 👁 1 views

## Abstract In this study, the effects of various formwork surfaces on the corrosion performance of reinforcing steel in concrete were examined. For this purpose, seven formwork surfaces from populus nigra, pinus silvestris, steel sheet, and four of plywoods were prepared. Three of the plywood form