𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Modelling of reinforcement corrosion – Investigations on the influence of shrinkage and creep on the development of concrete cracking in the early propagation stage of reinforcement corrosion

✍ Scribed by E. Bohner; H.S. Müller

Publisher
John Wiley and Sons
Year
2006
Tongue
German
Weight
180 KB
Volume
57
Category
Article
ISSN
0947-5117

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Since the initiation stage of the damage process due to reinforcement corrosion had been successfully investigated in the recent past, the damage progress in the propagation stage is currently in the focus of research. This work deals with the mechanisms of cracking and spalling due to corrosion of reinforcement and aims for the development of an analytic prediction model of the damage process. On this occasion the influence of shrinkage and creep on the stress condition within the concrete cover is of major importance to the subsequent analysis of the crack formation due to reinforcement corrosion in the early propagation stage.

📜 SIMILAR VOLUMES

Modelling of reinforcement corrosion – I
Modelling of reinforcement corrosion – Influence of concrete technology on corrosion development
✍ M. Beck; B. Isecke; J. Lehmann 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 289 KB

## Abstract Reinforcement corrosion is influenced by different parameters like resistivity of concrete, setting conditions and also by concrete technology. Moreover the presence of cathodic areas and the possibility of unhampered cathodic reaction influences the reinforcement corrosion. In this pap

The effects of various formwork surfaces
The effects of various formwork surfaces on the corrosion performance of reinforcing steel in concrete
✍ S. Subaşı; M. Arslan; G. Durmuş 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 German ⚖ 448 KB 👁 1 views

## Abstract In this study, the effects of various formwork surfaces on the corrosion performance of reinforcing steel in concrete were examined. For this purpose, seven formwork surfaces from populus nigra, pinus silvestris, steel sheet, and four of plywoods were prepared. Three of the plywood form

Monitoring the corrosion and remediation
Monitoring the corrosion and remediation of reinforced concrete on-site: An alternative approach
✍ N. Birbilis; B.W. Cherry 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 309 KB 👁 1 views

Difficulties associated with the interpretation of site data collected over long periods of time from commonly used electrochemical corrosion monitoring techniques often make it difficult to assess the corrosion of reinforcing steel. An alternative approach for the interpretation of data is proposed

Theoretical considerations on the suppos
Theoretical considerations on the supposed linear relationship between concrete resistivity and corrosion rate of steel reinforcement
✍ J. Gulikers 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 425 KB 👁 1 views

Theoretical considerations on the supposed linear relationship between concrete resistivity and corrosion rate of steel reinforcement J. Gulikers\* Traditionally, the assessment of service life of steel reinforced concrete structures has been focused on the prediction of the time required to achieve

Influence of the chromate content in cem
Influence of the chromate content in cement on the corrosion behaviour of steel in concrete
✍ P. Schieß; T. F. Mayer; K. Osterminski 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 German ⚖ 360 KB 👁 1 views

## Abstract Chromate, which is known to be an effective corrosion inhibitor in various applications, is contained in cement as a trace element. So far its influence on the corrosion of steel in contact with concrete has not been investigated. However, as the introduction of chromate‐reduced cements