𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of temperature on the localized corrosion of stainless steels

✍ Scribed by St. Matsch; H. Böhni

Book ID
110666463
Publisher
SP MAIK Nauka/Interperiodica
Year
2000
Tongue
English
Weight
729 KB
Volume
36
Category
Article
ISSN
1023-1935

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of nitrogen and manganese on l
Influence of nitrogen and manganese on localized Corrosion behaviour of stainless steels in chloride environments
✍ Dr. G. Rondelli; Dr. Ing. B. Vicentini; Prof. A. Cigada 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 German ⚖ 542 KB

## Abstract Electrochemical localized corrosion tests in substitute ocean water at 40°C and 70°C and ASTM G48 tests in 6% FeCl~3~ solution were performed on three classes of stainless steels: Ni‐austenitic (both traditional and with high nitrogen content ones), high nitrogen Mn‐austenitic nickel fr

Influence of heat flux and surface tempe
Influence of heat flux and surface temperature on the intergranular corrosion of stainless steel
✍ T. Prošek; P. Novák; J. Bystrianský 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 258 KB 👁 1 views

## Abstract The exposure tests followed by metallographic evaluation and the electrochemical reactivation measurements in double‐loop (DL‐EPR) modification were used for investigation of the influence of non‐boiling heat transfer on initiation and rate of propagation of intergranular corrosion (IGC

Influence of microstructure on the corro
Influence of microstructure on the corrosion resistance of hyperduplex stainless steel
✍ S. S. M. Tavares; J. M. Pardal; E. Ponzio; A. Loureiro; J. A. de Souza 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 German ⚖ 600 KB

## Abstract Hyperduplex UNS S32707 is a newly developed austenitic–ferritic stainless steel. The steel contains about 27%Cr, 7%Ni, 4.5%Mo, and 0.4%N, which results in a pitting resistance equivalent factor (PRE) equal to 49. In this study, the pitting corrosion resistance of this new grade of stain