✦ LIBER ✦

Influence of surface oxidation on thermal shock resistance and flexural strength of SiC/Al2O3composites

✍ Scribed by Chin-Chen Chiu

Publisher: Springer
Year: 1994
Tongue: English
Weight: 863 KB
Volume: 29
Category: Article
ISSN: 0022-2461
DOI: 10.1007/bf01154682

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Bending strength and crack-healing behav

Bending strength and crack-healing behavior of Al2O3/SiC composites ceramics

✍ Hae Sook Kim; Mi Kyung Kim; Sun Bae Kang; Seok Hwan Ahn; Ki Woo Nam 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 665 KB

Five kinds of ceramics were used to evaluate the bending strength under three-point bending. The bending test was carried out at room temperature. The crack-healing behavior and the bending strength of the crack-healed specimens were investigated from room temperature to 1723 K. The bending strength

Thermal shock behavior of as-sintered an

Thermal shock behavior of as-sintered and pre-oxidation Zr2Al4C5–20SiC composites

✍ Guiqing Chen; Rubing Zhang; Hao Zou 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 571 KB

A water-quenching technique was adopted to evaluate the thermal shock behavior of as-sintered and pre-oxidation Zr 2 Al 4 C 5 -20 vol.%SiC composites in an air atmosphere. The strength retention of the two kinds of composites was measured after varying temperature (DTc) up to 800 °C. As-sintered Zr

Influence of La2O3 addition on hardness,

Influence of La2O3 addition on hardness, flexural strength and microstructure of hot-pressing sintered WC–MgO bulk composites

✍ J. Ma; S.G. Zhu; P. Di; Y. Zhang 📂 Article 📅 2011 🏛 Elsevier Science ⚖ 920 KB

A detailed investigation is carried out into the influences of the lanthanum oxide (La 2 O 3 ) addition upon the microstructural characteristics and the mechanical properties of the WC-MgO composite bulk prepared by hot-pressing sintering. The results indicate that due to the unique properties of ra

Effect of thermal-shock and autoclave tr

Effect of thermal-shock and autoclave treatment on the microstructure of Al2O3ZrO2 composite

✍ N.C. Biswas; S.P. Chaudhuri 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 598 KB

Tribological behaviour and wear resistan

Tribological behaviour and wear resistance of a SiC–MoSi2 composite dry sliding against Al2O3

✍ L. Micele; G. Palombarini; S. Guicciardi; L. Silvestroni 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 554 KB

A composite consisting of 30 vol.% MoSi 2 particles in SiC matrix was prepared by liquid phase sintering carried out with the aid of small additions of Al 2 O 3 and Y 2 O 3 and then submitted to dry sliding tests using alumina as the counterfacing body under different conditions of applied load (15,

Effects of Testing Temperatures and Ther

Effects of Testing Temperatures and Thermal Treatments on Flexural Strength of Si3N4-MoSi2-BN Composites

✍ V. Medri; S. Guicciardi; V. Dupont; C. Melandri; A. Bellosi 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 625 KB

The machinability of ceramic materials can be improved by the addition of hexagonal‐BN. Si~3~N~4~/h‐BN composites are suitable as rotor seals for gas turbine engines in the ranges 1000°C–1300°C. Oxidation resistance and strength retention can be improved by the addition of MoSi~2~ up to 1500°C. Stre