𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of Mould Materials on the Morphological and Mechanical Properties of Injection-Moulded Prototypes

✍ Scribed by Walter Michaeli; Falk Lindner

Publisher
John Wiley and Sons
Year
2001
Tongue
English
Weight
142 KB
Volume
286
Category
Article
ISSN
1438-7492

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Influence of EP/PP viscosity ratio on th
Influence of EP/PP viscosity ratio on the surface morphology and elasticity of injection moulded PP/EP
✍ Nysten, Bernard; Ghanem, Antoine; Costa, Jean-Louis; Legras, Roger πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 477 KB πŸ‘ 1 views

The inΓ½uence of the viscosity ratio between (ethylene-propylene) copolymer (EP) and polypropylene (PP) on the EP surface distribution in injection moulded disks of PP/EP resins has been investigated by transmission electron microscopy (TEM) and by atomic force and force modulation microscopies (AFM

Polyetherimide-modified epoxy networks:
Polyetherimide-modified epoxy networks: Influence of cure conditions on morphology and mechanical properties
✍ E. Girard-Reydet; V. Vicard; J. P. Pascault; H. Sautereau πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 466 KB πŸ‘ 1 views

The morphologies and mechanical properties of thermoplastic-modified epoxy networks generated through the reaction-induced phase separation procedure were studied as a function of isothermal cure conditions. The selected model system was diglycidyl ether of bisphenol A cured with 4,4-methylenebis [3