𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The influence of silicate modification and compatibilizers on mechanical properties and morphology of anhydride-cured epoxy nanocomposites

✍ Scribed by Carsten Zilg; Ralf Thomann; Jürgen Finter; Rolf Mülhaupt

Publisher
John Wiley and Sons
Year
2000
Tongue
English
Weight
93 KB
Volume
280-281
Category
Article
ISSN
1438-7492

No coin nor oath required. For personal study only.

✦ Synopsis

Young's modulus and tensile strength of nanocomposites containing 10 wt.-% of C12A compatibilized with DDS (wt.-% with respect

📜 SIMILAR VOLUMES

Mechanical properties and failure surfac
Mechanical properties and failure surface morphology of amine-cured epoxy/clay nanocomposites
✍ Hiroaki Miyagawa; Kit H. Foo; Isaac M. Daniel; Lawrence T. Drzal 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 401 KB 👁 1 views

## Abstract The tensile and impact properties of amine‐cured diglycidyl ether of bisphenol A based nanocomposites reinforced by organomontmorillonite clay nanoplatelets are reported. The sonication processing scheme involved the sonication of the constituent materials in a solvent followed by solve

Polyetherimide-modified epoxy networks:
Polyetherimide-modified epoxy networks: Influence of cure conditions on morphology and mechanical properties
✍ E. Girard-Reydet; V. Vicard; J. P. Pascault; H. Sautereau 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 466 KB 👁 1 views

The morphologies and mechanical properties of thermoplastic-modified epoxy networks generated through the reaction-induced phase separation procedure were studied as a function of isothermal cure conditions. The selected model system was diglycidyl ether of bisphenol A cured with 4,4-methylenebis [3

Cure behavior, morphology, and mechanica
Cure behavior, morphology, and mechanical properties of the melt blends of epoxy with polyphenylene oxide
✍ S. J. Wu; T. K. Lin; S. S. Shyu 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 330 KB 👁 2 views

Cure behavior, miscibility, and phase separation have been studied in blends of polyphenylene oxide (PPO) with diglycidyl ether of bisphenol A (DGEBA) resin and cyanate ester hardener. An autocatalytic mechanism was observed for the epoxy/PPO blends and the neat epoxy. It was also found that the epo